Hello Everyone. Hope you enjoyed reading the LAN to LAN tunnel blog series. Now lets read some interesting facts about Remote access VPN.
For this I have a computer somewhere on the internet using VPN client. Then Head end device an IOS router where this client will be terminating and behind router I have 10.1.1.0/24 local subnet that we want to access.
Please refer the following Diagram for more details-------
Now lets Look into some of the configuration aspects----
Now we will talk about the VPN client itself----
Software VPN Client Configuration
Add All the details like connection entry, Description, Host, Name, Password etc, as configured on hand end box.
To connect, double click on the Connection Entry as shown up in the screen shot.
Cisco IOS Debugs: Phase I Negotiation
Please refer the detailed debugs and step by step tunnel creation (Phase 1 and Phase 2)
Cisco IOS Debugs: Phase I.5 Negotiation (Basically X Auth )
Cisco IOS Debugs: Phase 2 Negotiation
That’s all from my side. In my next blog I will be discussing the VPN Client logs followed by some real time scenarios.
Please leave your comments, inputs and feedback and also let me know what do you want to see in future blogs.
Hi all , has anyone came across any cisco documentation on banner grabbing prevention ?example below from running zenmap with this command nmap -sV --script banner 10.0.0.59(truncated)5060/tcp open sip Tandberg-4137 VoIP server X12.5.15061/tcp ...
Hi guys,We don't want to use NSP or certificate during the single SSID BYOD On-boarding, we just want to let user register their device's MAC address and then authorization the VLAN based on user group.I found below discussion, but seems the screen copy i...
Today I had 6 endpoints within 3 hours all quarantine the following file: 8d4fdcb52b32afbcef4450ca88668def9b245a6f7ab2aa26ec3a4324a0b1f461When I look what was happening with each endpoint in AMP's Device Trajectory I see this:The event only indicate...
After a "TelePresence SX20" disconnect occurred in a video conference, troubleshooting was initiated to identify the root cause. After log analysis, we found that the call was disconnected by H.323 timeout.I would like to know if you have any analysis or ...
I have an Ironport C670, where all licenses have expired except for Incoming Mail Handling, but the emails were "being sent" because there was no queue at the checkout, but the recipients did not receive them, however all employees were receiving and emai...