12-10-2015 03:50 AM
hello friends,
when i configure vlan in switch 4506 there are a error is there
"error exiting config-vlan mode 33 :attempt to change state of a default vlan "
please help me to solve this error...
12-10-2015 05:54 AM
It appears you are facing symptoms similar to this defect:
https://tools.cisco.com/bugsearch/bug/CSCtt45567/?reffering_site=dumpcr
Do you have any Nexus switches in your environment?
-Wes
12-10-2015 06:30 AM
Dear Wesley Austin,
yes our network we use nexux5k & nexus2k switches ...
can you explain me how to affect nexus in this problem ..?
12-12-2015 02:57 AM
Workaround:
1. use VTP version 2.
2. do one of the followings:
a. Configure the N7K as a VTP server and the IOS devices as VTP client
or
b. Configure the N7K as VTP client and other IOS devices as VTP server.
Once the VTP database on the IOS is corrupted, the only way to recover from the error condition is to clean up the VTP database.
For CAT4500, the procedure is to enter command "erase cat4000_flash:" and relaod.
For CAT2900, 3560, 3750, the procedure is first backup the configuration, write erase, delete flash:vlan.dat, and then reload. After the switch boots up, restore the configuration.
12-12-2015 10:16 PM
first of all thanks for replay
any possible solution to solve it without down switch...?
03-15-2018 09:03 PM
This document describes how you can troubleshoot hardware problems and related issues that are common on Cisco Catalyst 4500/4000 switches with Supervisor Engine II+, III, IV, and V modules. Refer to Hardware Troubleshooting for Catalyst 4000/4912G/2980G/2948G Series Switches for information on how to troubleshoot Supervisor Engine I and II.
please refer the below link for more detail :-
https://www.cisco.com/c/en/us/support/docs/switches/catalyst-4500-series-switches/69081-Catalyst4500-switch.html
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide