07-20-2011 08:48 AM
Hello
We have a nexus 2000 connecto to two nexus 7010 as FEX.
I see this in first nexus
nexus-1(config)# sh fex
FEX FEX FEX FEX
Number Description State Model Serial
------------------------------------------------------------------------
101 FEX0101 Online N2K-C2248TP-1GE JAF1437BRCA
but on nexus-2 i see same nexus offline
nexus-2(config)# sh fex
FEX FEX FEX FEX
Number Description State Model Serial
------------------------------------------------------------------------
--- -------- Offline N2K-C2248TP-1GE JAF1437BRCA
I try to insert fex portchannel on vPC domani ( alredy active for network vpc) but i recive that error:
nexus-2(config)# interface port-channel 100
nexus-2(config-if)# vpc 100
ERROR: Error in performing configuration: Unsupported option for sap 167
in vpc I see:
sh vpc
Legend:
(*) - local vPC is down, forwarding via vPC peer-link
vPC domain id : 1
Peer status : peer adjacency formed ok
vPC keep-alive status : peer is alive
Configuration consistency status: success
Type-2 consistency status : success
vPC role : primary
Number of vPCs configured : 2
Peer Gateway : Disabled
Dual-active excluded VLANs : -
vPC Peer-link status
---------------------------------------------------------------------
id Port Status Active vlans
-- ---- ------ --------------------------------------------------
1 Po1 up 1
vPC status
----------------------------------------------------------------------
id Port Status Consistency Reason Active vlans
-- ---- ------ ----------- ------ ------------
10 Po10 up success success 1
100 Po100 down* Not Consistency Check Not -
Applicable Performed
anyone can help me?
Ty
Solved! Go to Solution.
07-20-2011 10:37 AM
07-20-2011 10:37 AM
It is not supported in the current release.
Regards,
jerry
07-21-2011 04:10 AM
ty soo much.
You know if this feature can be available on the next 5.2 relase?
Regards
07-21-2011 07:47 AM
Not that I am aware of. Short answer will be a "no".
Regards,
jerry
11-10-2011 11:18 PM
In which release, this feature will be supported?
11-11-2011 06:14 AM
Nothing i m aware of.
Regards,
jerry
01-31-2013 01:08 AM
Hi, is this feature suppored in 6.1 release?
01-31-2013 07:32 PM
No, it is not supported in 6.1.
06-04-2015 06:33 AM
We tested this in our lab and it is possible. You have to make sure your 7K is licensed for it and you enable the FEX Feature set on the 7K
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide