cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
2510
Views
0
Helpful
8
Replies
sp2891311
Beginner

help: problem to connect nexus 2000 to two nexus 7000 with vPC

Hello

We have a nexus 2000 connecto to two nexus 7010 as FEX.

I see this in first nexus

nexus-1(config)# sh fex

  FEX         FEX           FEX                       FEX              

Number    Description      State            Model            Serial    

------------------------------------------------------------------------

101        FEX0101                Online     N2K-C2248TP-1GE   JAF1437BRCA

but on nexus-2 i see same nexus offline

nexus-2(config)# sh fex

  FEX         FEX           FEX                       FEX              

Number    Description      State            Model            Serial    

------------------------------------------------------------------------

---       --------               Offline     N2K-C2248TP-1GE   JAF1437BRCA

I try to insert fex portchannel on vPC domani ( alredy active for network vpc) but i recive that error:

nexus-2(config)# interface port-channel 100

nexus-2(config-if)# vpc 100

ERROR: Error in performing configuration: Unsupported option for sap 167

in vpc I see:

sh vpc

Legend:

                (*) - local vPC is down, forwarding via vPC peer-link

vPC domain id                   : 1  

Peer status                     : peer adjacency formed ok     

vPC keep-alive status           : peer is alive                

Configuration consistency status: success

Type-2 consistency status       : success

vPC role                        : primary                      

Number of vPCs configured       : 2  

Peer Gateway                    : Disabled

Dual-active excluded VLANs      : -

vPC Peer-link status

---------------------------------------------------------------------

id   Port   Status Active vlans   

--   ----   ------ --------------------------------------------------

1    Po1    up     1                                                

vPC status

----------------------------------------------------------------------

id   Port   Status Consistency Reason                     Active vlans

--   ----   ------ ----------- ------                     ------------

10   Po10   up     success     success                    1         

100  Po100  down*  Not         Consistency Check Not      -         

                   Applicable  Performed                            

anyone can help me?

Ty

1 ACCEPTED SOLUTION

Accepted Solutions
Jerry Ye
Cisco Employee

It is not supported in the current release.

Regards,

jerry

View solution in original post

8 REPLIES 8
Jerry Ye
Cisco Employee

It is not supported in the current release.

Regards,

jerry

View solution in original post

ty soo much.

You know if this feature can be available on the next 5.2 relase?

Regards

Not that I am aware of. Short answer will be a "no".

Regards,

jerry

In which release, this  feature will be supported?

Nothing i m aware of.

Regards,

jerry

vldmegafondv
Beginner

Hi, is this feature suppored in 6.1 release?

No, it is not supported in 6.1.

We tested this in our lab and it is possible. You have to make sure your 7K is licensed for it and you enable the FEX Feature set on the 7K

Content for Community-Ad