Hello
We have a nexus 2000 connecto to two nexus 7010 as FEX.
I see this in first nexus
nexus-1(config)# sh fex
FEX FEX FEX FEX
Number Description State Model Serial
------------------------------------------------------------------------
101 FEX0101 Online N2K-C2248TP-1GE JAF1437BRCA
but on nexus-2 i see same nexus offline
nexus-2(config)# sh fex
FEX FEX FEX FEX
Number Description State Model Serial
------------------------------------------------------------------------
--- -------- Offline N2K-C2248TP-1GE JAF1437BRCA
I try to insert fex portchannel on vPC domani ( alredy active for network vpc) but i recive that error:
nexus-2(config)# interface port-channel 100
nexus-2(config-if)# vpc 100
ERROR: Error in performing configuration: Unsupported option for sap 167
in vpc I see:
sh vpc
Legend:
(*) - local vPC is down, forwarding via vPC peer-link
vPC domain id : 1
Peer status : peer adjacency formed ok
vPC keep-alive status : peer is alive
Configuration consistency status: success
Type-2 consistency status : success
vPC role : primary
Number of vPCs configured : 2
Peer Gateway : Disabled
Dual-active excluded VLANs : -
vPC Peer-link status
---------------------------------------------------------------------
id Port Status Active vlans
-- ---- ------ --------------------------------------------------
1 Po1 up 1
vPC status
----------------------------------------------------------------------
id Port Status Consistency Reason Active vlans
-- ---- ------ ----------- ------ ------------
10 Po10 up success success 1
100 Po100 down* Not Consistency Check Not -
Applicable Performed
anyone can help me?
Ty
