04-10-2014 09:18 AM
I have a nexus 1110-s with a single VSM. I need to know how to reset it to factory default so I can reconfigure it as if it was new.
Thanks
04-10-2014 12:20 PM
Do you want to delete only the VSM or the config on the N1110 itself?
If its the latter, you can do a 'erase startup-config' like you do on a router/switch. Now reboot the N1110 and it would restart prompting you to input the details about the domain id,hostname,control vlan etc..
Thanks,
Karthic
04-16-2014 02:06 AM
I have de same problem. But i tried the same solution but i can not set "erase startup-config" becaso the erase commadn doesnt exit. Someone now how can i do the reset fatory?
04-22-2014 08:20 AM
Hi,
You can do a
cimc# connect host
1010# write erase
Warning: This command will erase the startup-configuration.
Do you wish to proceed anyway? (y/n) [n]
or, reimage the device using the installer CD.
HTH,
Joe
04-23-2014 08:40 AM
Thanks Joe,
i check the command, it works fine.
Find answers to your questions by entering keywords or phrases in the Search bar above. New here? Use these resources to familiarize yourself with the community: