Hello all,
I read all possible documentation, try it, but I would like a confirmation on the following.
There is no way I can connect a N2248PQ with FET-10G on the N2K side, right?
From my knowledge the N2248PQ supports only FET-40G on the 4 x 40G ports at the end of the switch.
I tested with a breakout cable 40G to 4 x 10G, with 40G end on the N2248PQ and the 4 x 10G on the N5K / N6K and this works.
However I'm interested if there is anyway to connect FET-10G on the N2248PQ.
Thanks and cheers,
Calin