I am working on a project to move a MDS 9509 switch running version 3.0(2a). The switch is the primary of a redundant pair. We are making room for SAN expansion. I just wanted some advise on the move. So far I have completed the following:wr memc...
In SAN 2.0 OS when you ran the show tech-support you could see if a particular VSAN is FCID persistent or not as follows:no fcdomain fcid persistent vsan 1fcdomain priority 150 vsan 2fcdomain domain 21 static vsan 2fcdomain fcid persistent vsan 2fcdo...
Hi,I will have 2 data centre connected with a 1gb possibly 2 x 1gb ethernet link.There will be some 802.q trunking between location and some traffic will be routed.I have the option of having my FCIP peer in the same vlan and carried in the trunk. Or...
I'm planning to implement MDS9124 in our SAN. Right now we need only local SAN inside one building. But there is a slight chance that in a future we'll need to connect to a remote site using FC ptorocol. The site is not too far away - 20 km or so. Bu...
I have a mds9509 and when attempting to redirect the output of the "show tech-support" command to either ftp or a local file on the switch, I receive the error: "Write error: No space left on the device".Bootflash and system resources all look fine:M...
I had a quick question re: importing fcaliases into the device-alias database.We have a series of zones that were previously configured using the fcalias for the member definition.After the successful import of fcaliases into the device-alias databas...
I have a 9505, After running the write erase command, I can no longer log into the switch via telnet with the default admin password or the last configured password. Also I no longer get any activity over the serial connection to log in through seri...
Anyone has used 3560G-24TS-S in that environment. I want to know which version of IOS support doing transport iSCSI via vlan.It would be a great help with a sample topology and configuration with IOS version for 3560.Thanks.
We are running VRRP and using In-Band Mgmt over vsan 254 w/ip to manage our SAN Fabric. I login into my Windows Fabric Manager Server then connect to our Seed Switch. I can see and manage our Core 9509's, however we have 9216 Edge Switches which I ...
I upgraded to 3.1(2a) and then I reinstalled Fabric Manger and Device Manager. Fabric Manager won't start, error is "Unable to connect to server! Admin login from 127.0.0.1 failed". Device Manager is fine.
HiI am in the process of having a seperate link (IP) installed between two of my Data Centre sites. The SAN is in one of them and I will be extending it (via FCIP) to the other once this big link is ready.There will be a combination of SAN traffic an...
