06-27-2012 11:05 PM
Hi,
Can I have some help with the following
I have a 7k -and when doing
conf t
vdc my-store-fcoe type storage
I get the following -
Note: Creating VDC, one moment please ...
Then 15 Minutes later -
Note: FCoE Enable failed
ERROR: VDC action failed, Cleaned up ungracefully
Any suggestions welcome
Best regards
PS
I would also like to know how I can check the license and the gracetime for Fcoe ?
Solved! Go to Solution.
07-31-2012 03:18 AM
Hi Dominic
I know this not gonna help you, but I faced the same problem and it was solved by enabling the system qos.
license fcoe module 7
!
install feature-set fcoe
!
system qos
service-policy type network-qos default-nq-7e-policy
!
vdc FCOE id 4 type storage
limit-resource module-type f1
allow feature-set fcoe
Cheers
Kenneth
06-28-2012 05:19 AM
Hello Dominic
Do you have the QoS enabled? If not, you will need this service-policy under system qos
N7K-24-12-7010-1# sh run ipqos
!Command: show running-config ipqos
!Time: Thu Jun 28 08:17:43 2012
version 5.2(4)
system qos
service-policy type network-qos default-nq-7e-policy
This is how you check for licenses
N7K-24-12-7010-1# sh license usage
Feature Ins Lic Status Expiry Date Comments
Count
--------------------------------------------------------------------------------
MPLS_PKG No - Unused -
STORAGE-ENT Yes - Unused Never -
ENTERPRISE_PKG No - Unused -
FCOE-N7K-F132XP Yes 1 Rsrved Never -
ENHANCED_LAYER2_PKG Yes - In use Never -
SCALABLE_SERVICES_PKG No - Unused -
TRANSPORT_SERVICES_PKG Yes - Unused Never -
LAN_ADVANCED_SERVICES_PKG Yes - In use Never -
LAN_ENTERPRISE_SERVICES_PKG Yes - In use Never -
--------------------------------------------------------------------------------
07-11-2012 10:53 PM
Hi,
So we have checkd and confirmed the licensing and qos is all good -
But the storage vdc created still fails after a 10-15 min wait
---------------
2012 Jul 12 17:18:46 AS-7010-1 %VDC_MGR-5-VDC_STATE_CHANGE: vdc 4 state changed to create in progress
2012 Jul 12 17:29:08 AS-7010-1 %VDC_MGR-3-VDC_ERROR: vdc_mgr: There has been a failure while enabling FCoE
2012 Jul 12 17:29:08 AS-7010-1 %VDC_MGR-5-VDC_STATE_CHANGE: vdc 4 state changed to delete in progress
2012 Jul 12 17:29:08 AS-7010-1 %VDC_MGR-3-VDC_ERROR: vdc_mgr: A sequence has timed out!
2012 Jul 12 17:29:08 AS-7010-1 %SYSMGR-3-SHUTDOWN_START: The System Manager has started the shutdown procedure.
2012 Jul 12 17:29:08 AS-7010-1 %SYSMGR-2-SHUTDOWN_SYSTEM_LOG: vdc 4 will shut down soon.
2012 Jul 12 17:29:08 AS-7010-1 %SYSMGR-STANDBY-3-SHUTDOWN_START: The System Manager has started the
shutdown procedure.
2012 Jul 12 17:29:08 AS-7010-1 %SYSMGR-STANDBY-2-SHUTDOWN_SYSTEM_LOG: vdc 4 will shut down soon.
2012 Jul 12 17:29:09 AS-7010-1 %VDC_MGR-2-VDC_OFFLINE: vdc 4 is now offline
----------------
Can someone help with suggestions or lookup in bugtrack
Cheers
Dominic
07-31-2012 03:18 AM
Hi Dominic
I know this not gonna help you, but I faced the same problem and it was solved by enabling the system qos.
license fcoe module 7
!
install feature-set fcoe
!
system qos
service-policy type network-qos default-nq-7e-policy
!
vdc FCOE id 4 type storage
limit-resource module-type f1
allow feature-set fcoe
Cheers
Kenneth
06-19-2013 08:16 PM
thanks a lot guys for this post...it really saved my time.
Regards,
Zulfi
06-20-2013 01:31 PM
Dominic,
Please post "show ver" and "show run" and I will have a look.
Thanks
Anthony
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide