날짜: 03-14-2024 04:55 AM
I'm about to retire an old server running Windows 2008 R2. This machine acts as a secondary DNS server for the domain. While technically I don't need two DNS servers, it is good practice to have a fall back in case the primary DNS server (i.e. the Domain Controller) fails. My first thought is to use the CBS350 as a replacement, so I did some searching on how to configure it as a secondary / slave DNS server. While there's a lot info about configuring DNS, I haven't found anything about using it as a secondary DNS server. Or maybe I'm looking for the wrong thing. Anyway, is this possible and if yes, how to configure things?
날짜: 03-14-2024 05:16 AM
There is nothing major requirement to setup secondary DNS Server
If you using MS DNS - there may be replication of Host and other records between them. (if that is not you doing)
just setup and DNS Server on Switch (if that support) - on the clients use primary MS DNS and Secondary Switch DNS IP address ?
Hope this should work for you to query FQDN DNS.
If you are doing any HOST A Entry then you need to replacate somehow on both the systems manually.
날짜: 03-14-2024 08:02 AM
There is no DNS server on CBS350. The DNS settings that you see there are client ones.
새로운 아이디어를 발견하고 저장하세요. 전문가 답변, 단계별 가이드, 최근 주제 등 다양한 내용을 확인해 보세요.
처음이신가요? 아래 팁들을 확인해 보세요. 시스코 커뮤니티 사용하기 새 멤버 가이드