CISCO SMB switch part number required

[shuvra.debnath]

Dear team,

good day,

I have a query related cisco unmanaged 10/100 switch with the following criteria below and give me the part number for the followings

1. cisco 8 port unmanaged 10/100 all 8 port POE switch

2. cisco 16 port unmanaged 10/100 all 16 port POE switch

addition** if there is any model that has (8 port poe+1 extra port to connect with DVR/NVR, also for 16 port poe+1 extra port to connect with DVR/NVR)

those switches will connect with IP camera

Thanks in advance

Shuvro Debnath

System engineer  

[Daniele Giordano · Accepted solution]

Hi, check the link below:

https://www.cisco.com/c/en/us/products/switches/110-series-unmanaged-switches/models-comparison.html

You can find a list of unmanged switch.

Regards.

[shuvra.debnath]

Hi Daniele,

Thank you so much for the reply

Also can you please suggest me which of them are all port POE, because I am not finding any clue 

I have searched different datasheets that says for 8 port switch 4 of them are poe and rest of them are non poe.

TIA

[Daniele Giordano · Accepted solution]

Data Sheet are here:

https://www.cisco.com/c/en/us/products/collateral/switches/110-series-unmanaged-switches/datasheet-c78-734450.html

This is the table related to PoE ports:

Power over Ethernet (PoE)

Model Name SF110D-08HP SF110D-16HP SG110D-08HP SG110-16HP SG110-24HP

Power Dedicated to PoE 32 watts 64 watts 32 watts 64 watts 100 watts

Number of PoE Ports 4 8 4 8 12

If you need more PoE ports you can check for 250 Series Switches but they are managed.

Data sheet is here:
https://www.cisco.com/c/en/us/products/collateral/switches/250-series-smart-switches/datasheet-c78-737061.html

Or 2960 switch:

https://www.cisco.com/c/en/us/products/switches/catalyst-2960-x-series-switches/models-comparison.html

Otherwise you can check for Linksys switch:

https://www.linksys.com/gb/c/business-network-switches/

Regards.

[shuvra.debnath]

Hi Daniele,

Thanks for the quick response and your support

with the reference with your table regarding POE ports, my question is there any model that has all ports poe? like "Model"-08HP that has 8 port poe!

if not then suggest me the solution in this regards and there is no option to go with linksys also no option for managed and higher model, because the purpose is to connect surveillance system.

Thanks

[Daniele Giordano]

110 series switch have only the half of ports poe.
If you need full ports poe you must switch to 250 series switch. In this case all ports are poe but you must check the power budget:
"the switches support 802.3at PoE+, 802.3af, and Cisco prestandard (legacy) PoE. Maximum power of 30.0W to any 10/100 or Gigabit Ethernet port, until the PoE budget for the switch is reached."
Check the link in the previous post to see datasheet.
Otherwise you can use 2960 switch:

https://www.cisco.com/c/en/us/products/collateral/switches/catalyst-2960-x-series-switches/datasheet_c78-728232.html

250 series switch and 2960 switch are managed but they work also without configuration in default mode.

Regards.

[shuvra.debnath]

Hi,

Thanks for the information

I am working on it, I will let you know if any guidance required 

Regards,

Shuvro