IP of Cisco SF 300-24pp

[hogrhonarfathalla]

I have a Cisco SF 300-24pp switch. All the switches are connected in sequence, with the last one connected to the ISP modem. I want to configure the switch, but my console cable is not functioning due to it having a male console end and a female RJ45 end. I tried accessing the switch using the default IP address, 192.168.1.254, in a web browser, but it appears that the IP address has been changed. How can I determine the new IP address of the switch?

[balaji.bandi]

If the switch out of the box that should work, until any one configured already.

Try to reset to factory and try same option using Quick start guide :

https://www.youtube.com/watch?v=qjGKbPmbPho

https://www.cisco.com/c/dam/en/us/td/docs/switches/lan/csbms/sf30x_sg30x/quick_start/78-19252-01.pdf

[hogrhonarfathalla]

Thank you.

[M02@rt37]

Hello @hogrhonarfathalla,

Wireshark port of your Switch to have information about the new IP.

[hogrhonarfathalla]

Thank you for your response, I'm login to my modem(ISP) and find the IP's 

[balaji.bandi]

Sure that router have arp of the switch - good one

[marce1000]

                      >...How can I determine the new IP address of the switch?
  - From a neighbor connected switch issue the command :  show cdp neighbors detail

 M.

[hogrhonarfathalla]

Thank you