12-31-2023 02:24 AM
In a network of my customers, there are 30 clients connected with 2 C2960S switches, also their uplink is SFC (1G).
I am considering managing the network via VLAN and need a Layer 3 Switch.
Could someone recommend C9200L or C9300L, Which is suitable for Me?
Also, is a license required for VLAN switching?
I really appreciate any help you can provide.
12-31-2023 02:29 AM
Hello @Mehdi Javadi
Check that model C9200L-24T-4G
24 ports RJ45 1G + 4 uplinks SFP ports (1G)
Since you need L2 SWITCH only without L3 features/capabilities, licence DNA Essentiel is the choosen one.
12-31-2023 03:58 AM
Thanks for reply @M02@rt37
Previously, network switches like C3750 did not need a license, and considering 3/5/7 years this license has been subscribed, what will happen after it is deactivated?
What is the main difference between C9200L and C9300L?
Is C9200L a L3 Switch?
12-31-2023 04:20 AM
Hello @Mehdi Javadi
Cisco Catalyst 3750 switches typically do not require separate licenses for basic functionality. If a license was subscribed for a specific period (3/5/7 years), once it expires, the switch would continue to operate with its base features. However, any advanced or subscription-based features that were enabled by the license might be disabled or revert to a default state.
The 9300L series is typically positioned as a higher-end model compared to the 9200L series.
9200L series are L2 switches and you could active L3 capabilities since the licence permit that :
Check here : https://www.cisco.com/c/m/en_us/products/software/dna-subscription-switching/en-sw-sub-matrix-switching.html
Note that cisco's oficial documentation and product datasheets provide comprehensive information about the features, specifications, and licensing for each switch model.
12-31-2023 02:32 AM
https://www.cisco.com/c/en/us/products/switches/switch-selector.html#~select-switch
use this to select best one for you
MHM
12-31-2023 06:02 AM
Could someone recommend C9200L or C9300L, Which is suitable for Me?
Adding to other posters already mentioned and you have already aware of Cat 9K switches.
Cat 9200 - Pure Layer 2 and some Layer 3 functionality not advanced level ( Limited to static routes)
Cat 9300 _ Flull blown Layer 3 switch - may required some feature advantage license have a look before you buying.
depends on the sales person you engaging and negotiating prices, if you have budget i will go my Favorite Cat 9300
check some compare by 3rd party :
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide