05-29-2015 08:06 AM
Good afternoon,
I'm working on figuring out why some remote branches cannot be managed by dialing in. The line dials and appears to connect, but in the terminal nothing ever shows up.
The configuration is this:
line 0/3/0
modem InOut
transport input all
stopbits 1
speed 115200
flowcontrol hardware
The two bolded statements were missing, and I put them in. I thought this would solve the issue, but it has not. Our configuration seems to be the same on working routers as the configuration above. We are using 2911's with 15.1XXX if that helps.
05-29-2015 03:06 PM
Hello,
I'm sorry you are having issues with your device, unfortunately this is not the right forum for this type of units as it is meant to be used for small business units only.
You can try moving it to the following section: https://supportforums.cisco.com/community/5716/voice-over-ip
I hope this helps.
05-30-2015 10:35 AM
Hi,
Try this link
http://www.cisco.com/en/US/docs/internetworking/troubleshooting/guide/tr1916.html
Regards
Alex
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide