12-07-2018 09:43 AM
Hello,
I created 4 VLANS in my switych cisco SF300-48PP
the switch is connected to a 192.168.1.1 ADSL router
VLAN 1 address 192.168.1.6 DHCP 192.168.1.7-192.168.1.63 / MASK 255.255.225.192
VLAN 2 address 192.168.1.65 DHCP 192.168.1.66-192.168.1.128 / MASK 255.255.225.192
VLAN 3 address 192.168.1.130 DHCP 192.168.1.7-192.168.1.190 / MASK 255.255.225.192
VLAN 1 address 192.168.1.192 DHCP 192.168.1.193-192.168.1.250 / MASK 255.255.225.192
My problem what I have the internet only in the VLAN1 not in the others
Cordially
Solved! Go to Solution.
12-11-2018 03:06 AM
12-11-2018 03:10 AM
12-11-2018 03:13 AM
12-11-2018 06:54 AM - edited 12-11-2018 06:56 AM
12-11-2018 08:18 AM
12-11-2018 10:36 AM
12-11-2018 01:03 PM
Can you post all your settings from you DLINK router wan side and Lan side setup screen shot.
12-11-2018 02:52 PM
12-11-2018 08:32 PM
12-12-2018 03:07 AM - edited 12-12-2018 04:53 AM
yes
Now I ping external adress for Model DLINK but I dont have Internet with VLAN 20/30/40
12-12-2018 08:18 AM
that is bit strange. if default route and internal routes are added it should be able to access internet. can you try traceroute and check where is it getting dropped?
12-12-2018 11:10 AM
12-12-2018 12:32 PM - edited 12-12-2018 12:34 PM
can you able to ping from VLAN 10, 20, 30 to 8.8.8.8 or 1.1.1.1
also post traceroute information to 8.8.8.8 1.1.1.1
what is the DNS Setting at PC ?
12-13-2018 01:09 AM
I do not think it's a DNS problem, because from VLAN 10 I do not have a problem
from VLAN 20,30,40 I can go to the external address of the Modem but I do not go out anymore it's like my vlan addresses are not routable
for the DNS I use 8.8.8.8 I even used other DNS of the operator who walk but without success
12-12-2018 06:10 PM
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide