SG100D-08 DHCP issue

[impaelas]

Having issues with the forum on Brave so here goes.

I have a Huawei modem/router that serves as a DHCP. To expand wired network I've plugged in SG100D-08 with a Cat5 cable. 

The problem is that IP addresses are not being assigned to devices connected via SG100D-08. Only one will receive an IP address and the rest remain disconnected.

Any ideas what might be the reason?

Thank you,

Imp 

[marce1000]

 - Note https://www.cisco.com/c/en/us/obsolete/switches/cisco-small-business-100-series-unmanaged-switches.html , it would advisable to 'support your business' with more recent devices : https://www.cisco.com/c/en/us/solutions/small-business/selector-tool.html

 M.

[impaelas]

Thx but I have this brand new and laying around. It should do more than fine to hook a set top box and a pc i believe.

[balaji.bandi]

SG100D-08  - is a just dumb switch / you need to look at your Huawei side what is the config on the port that is connected to the switch, and see any security settings.

[impaelas]

Thx, aware of that which is why it's puzzling me. DHCP is on, tried setting static IP addresses via MAC but to no avail.