09-12-2020 05:55 PM
I have an SG350-28P I am trying to configure as follows:
VLAN 1 - Default
VLAN 100 - Customers
and use the capability of the unit to provide DHCP for the VLAN 100.
I've been able to configure the DHCP, but how do I associate the DHCP pool to the VLAN 100?
I'm comfortable with CLI.
My head is getting sore from all of the pounding on the wall.
09-13-2020 12:11 AM
- The question is a bit wrong and should be ; how can I make systems on vlan 100 get their addresses from the DHCP server. Usually this is achieved by configuring an 'ip helper' for the designated vlan pointing to the DHCP server.
M.
09-13-2020 05:19 AM
Where is the DHCP Server, is this configured in SG350 or outside. ( you need to configure DHCP relay of external)
Look at the configuration guide on CLI:
09-15-2020 12:28 PM
Thank you Gents.
Maybe I should have been a little more clear. I want use the DHCP server functionality on the SG350 for my VLAN. This way, I will be able to isolate the VLAN of the customer from the public area.
I will go digging through the PDF posted and see what I can learn. Any pointers will be appreciated.
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide