Switches - Small Business

I have been working on an issue with TAC. After a power outage VLAN 30 no longer responds. There are no arp entries and the ip address of the vlan does not respond to ICMP. I have posted the configuration. My upstream router is on port 1/1/48 and a S...

Hi to all,I have 48 port Linksys switch srw248g4p. It stopped working after power failure. When i connect via hyperterminal i got this#####################################################################Image Loader 1.0.1<ERR> Diagnostic Loading Fail...

I have a new switch in a new environment that keeps changing its ports' vlan configurations! Some ports will randomly change from trunk to access all on their own. Some will stay on trunk but then completely change their admin and operational vlans. ...

Network Assistant tool for SG350 model  pls share any one 

Hi allI'm trying to deploy a simple DSCP-Marking policy on some SG350X:-> mark some traffic DSP EF, mark everything else to 0.-> Trust DSCP on Uplink-Ports My problem: There is no "class-default" to remark everything else to 0.From the manual I under...

Hi, The SG350 is a L2/L3 switch.When creating vlan-21 and entered the command "switchport access vlan 21" at every interface every things work fine.The L3 config is as below, and currently it is used to manage the switch only, routing occurs at anoth...

I've searched everywhere but can't find the model number I need to order for a power adapter for an SG200-08P. Looks like the round 4 pin connector.Many thanks

Dear Team, how to bind user device particular mac address in rfs7000 (ap 621 and ap6522)  (need to connect only mac binded users, other users need to deny the connectivity ) please help.  thanks in advance.   in

Hi All,Due to redundancy I have 4 switches SG550XG/X in hybrid stacking mode.  Ring topology:Unit 1(Master): SG550X-24Unit 2(Backup): SG550X-24Unit 3(Slave): SG550XG-8F8TUnit 4(Slave): SG550XG-8F8T What exactly happens:1) Unit 2 loses connection and ...

Hi, I just bought the above switch to power my network and it works just fine till I want to power any POE device. I tried different devices and non will get power from the switch.The strange thing is, that I can't even open the POE configuration in ...

Hi..Switch model as far as I remember g300 10 Port.. imagine I have interface like tv connected by Ethernet cable to one of input ports..when switch is turned on all of my user work properly shortly after start the errands the port that belong to spe...

Hi, I can get the MAC address of a SG350 switch with "show system" command but I cannot find a command to get the MAC address of the switch ports like we get with a "show interfaces" on IOS. I noticed that the MAC address used by each port seems to b...