09-10-2014 08:41 AM
Hello,
We have two new SG300 managed switches. I've upgraded the firmware from the stock to 1.3.5.58 with no problem but when I go to upgrade to the newest firmware - 1.4.x I get the following error on both switches:
Files Transferred: 7011840
Status: Copy failed
Error Message: Copy: SW code file is over sized
Any idea what is wrong? I can't find any option to delete older images. Thanks,
Solved! Go to Solution.
09-10-2014 09:44 AM
Hello,
do you do the upgrade through the web interface? I did the upgrade from 1.3.7.18 without any issues.
What is your bootloader version? "Show version" on the command line.
kind regards
Lukasz
09-10-2014 05:43 PM
Check out this post it appears to be the same issue.
https://supportforums.cisco.com/discussion/12285601/cisco-sg200-50-gigabit-smart-switch-cant-upgrade-fw
09-10-2014 09:44 AM
Hello,
do you do the upgrade through the web interface? I did the upgrade from 1.3.7.18 without any issues.
What is your bootloader version? "Show version" on the command line.
kind regards
Lukasz
10-12-2014 06:06 PM
To upgrade the bootloader through TFTP server on the GUI, see details in
http://sbkb.cisco.com/CiscoSB/ukp.aspx?vw=1&docid=f1e39061efb14c94a570bcbd6582167b_Firmware_Upgrade_Troubleshooting_on_300_and_500_Series_Manag.xml&pid=4&fcid=&fpid=&slnid=6
09-10-2014 05:43 PM
Check out this post it appears to be the same issue.
https://supportforums.cisco.com/discussion/12285601/cisco-sg200-50-gigabit-smart-switch-cant-upgrade-fw
09-10-2014 06:51 PM
Yes, thanks to both of you for pointing me in the right direction. I missed the readme note that said you had to upgrade the bootloader to a higher version. Once I did that with tftp I was able to correct the problem. Thanks again.
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide