1G is dead. What Cisco switches have no 1G ports?

[cmccane]

Neither me or my org would pay money for any switch with 1G ports. Those days are in the past. Which switches offer up to 48 nbase-T with full support for 10G over copper for all ports?

[Flavio Miranda]

@cmccane 

Cisco 9300X does.

https://www.cisco.com/c/en/us/products/collateral/switches/catalyst-9300-series-switches/nb-06-cat9300-ser-data-sheet-cte-en.html

[Leo Laohoo]

---

@cmccane wrote:
Neither me or my org would pay money for any switch with 1G ports.

---

Very brave to put the foot down. 

Let us hope that no one is going to buy a client that requires 10 Mbps.

[balaji.bandi]

Again cost also matters, if the budget is not issue, you have different models available with combination.

Question to ask here is does your end point ready with 10G connection ? do they really need 10GB speed ?

when you design network, we need to address all these issues.

[M02@rt37]

Hello @cmccane 

AS @Flavio Miranda says, Catalyst 9300 series offers models with 48 multigigabit (NBASE-T) ports that support speeds of 1G, 2.5G, 5G, and 10G over copper.