12-28-2013 02:46 PM - edited 03-07-2019 05:17 PM
Hi Everyone,
On 2620 Router is there any ios version that supports IPV6 ospf under interface config as shown below
(config)#int fastEthernet 1
(config-if)#ipv?
ipv6
1(config-if)#ipv6 ?
IPv6 interface subcommands:
ospf OSPF interface commands
sh ver
Cisco Internetwork Operating System Software
IOS (tm) C2600 Software (C2600-A3JS-M), Version 12.2(26c), RELEASE SOFTWARE (fc1)
Copyright (c) 1986-2007 by cisco Systems, Inc.
Compiled Mon 30-Jul-07 18:03 by ccai
Image text-base: 0x8000808C, data-base: 0x815F24E0
ROM: System Bootstrap, Version 11.3(2)XA4, RELEASE SOFTWARE (fc1)
R2 uptime is 38 minutes
System returned to ROM by reload
System image file is "flash:c2600-a3js-mz.122-26c.bin"
cisco 2620 (MPC860) processor (revision 0x00) with 61440K/4096K bytes of memory.
Processor board ID JAD0650058C (300495423)
M860 processor: part number 0, mask 49
Bridging software.
X.25 software, Version 3.0.0.
SuperLAT software (copyright 1990 by Meridian Technology Corp).
TN3270 Emulation software.
2 FastEthernet/IEEE 802.3 interface(s)
2 Serial network interface(s)
32K bytes of non-volatile configuration memory.
16384K bytes of processor board System flash (Read/Write)
Configuration register is 0x2102
Regards
Mahesh
12-29-2013 08:53 AM
Hi Mahesh,
It appears that you already have IPv6 support (under the interface) with the current version of the IOS. The IOS should be the same for 2620 and 2621 routers.
HTH
12-29-2013 11:09 AM
Hi Reza,
That output is from the different Router.
Regards
Mahesh
12-29-2013 12:57 PM
Hi Mahesh,
Try this 123 version and test with it, it supports IPv6 for OSPF:
c2600-is4-mz.123-26.bin
HTH
12-29-2013 01:20 PM
Hi Reza,
I can not find this under cisco download website for 2620 router.
Do you direct link to download this?
Regards
Mahesh
Find answers to your questions by entering keywords or phrases in the Search bar above. New here? Use these resources to familiarize yourself with the community: