cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
1216
Views
0
Helpful
4
Replies

2620 IPV6 support

mahesh parmar
Beginner
Beginner

                   Hi Everyone,

On 2620 Router is there any ios version that supports IPV6 ospf under interface config as shown below

(config)#int fastEthernet 1
(config-if)#ipv?
ipv6

1(config-if)#ipv6 ?
IPv6 interface subcommands:
    ospf                OSPF interface commands

    sh ver
Cisco Internetwork Operating System Software
IOS (tm) C2600 Software (C2600-A3JS-M), Version 12.2(26c), RELEASE SOFTWARE (fc1)
Copyright (c) 1986-2007 by cisco Systems, Inc.
Compiled Mon 30-Jul-07 18:03 by ccai
Image text-base: 0x8000808C, data-base: 0x815F24E0

ROM: System Bootstrap, Version 11.3(2)XA4, RELEASE SOFTWARE (fc1)

R2 uptime is 38 minutes
System returned to ROM by reload
System image file is "flash:c2600-a3js-mz.122-26c.bin"

cisco 2620 (MPC860) processor (revision 0x00) with 61440K/4096K bytes of memory.
Processor board ID JAD0650058C (300495423)
M860 processor: part number 0, mask 49
Bridging software.
X.25 software, Version 3.0.0.
SuperLAT software (copyright 1990 by Meridian Technology Corp).
TN3270 Emulation software.
2 FastEthernet/IEEE 802.3 interface(s)
2 Serial network interface(s)
32K bytes of non-volatile configuration memory.
16384K bytes of processor board System flash (Read/Write)

Configuration register is 0x2102

Regards

Mahesh

4 Replies 4

Reza Sharifi
Hall of Fame Master Hall of Fame Master
Hall of Fame Master