2811 service module compatability

[jeffhouston]

Hi,

Will a Cisco NM-2FE2W Network Module work in a 2811 router and if so what are the commands to set it up? I know how to setup T1 controllers but is this the same or similar or what? (presuming the module will work?)

Thanks!

[Reza Sharifi · Accepted solution]

Hi,

The 2811 does not support NM-2FE2W module.  See table-3 in this link:

http://www.cisco.com/c/en/us/products/collateral/routers/2800-series-integrated-services-routers-isr/prod_qas0900aecd80169bd6.html

HTH