cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
909
Views
0
Helpful
6
Replies
Beginner

2960-X

Can you assign an IP address to an SVI on the 2960-X.

If not, can it be configured with a management address?

Thanks

6 REPLIES 6
Engager

Yes you can assign IP to SVI

Yes you can assign IP to SVI on 2960x

You can also configure management port

Please rate useful posts & remember to mark any solved questions as answered. Thank you.
Beginner

Thank you for the reply.

Thank you for the reply.

Out of interest where can you find information on the other features available on the 2960X?

I tried the Cisco Navigator but it doesn't seem to work.

The IOS we are looking at is the LAN Base 15.2.2E5 MD

VIP Expert

What spesific feature are you

What spesific feature are you looking for?

Here is a link to the data sheet and supported features:

http://www.cisco.com/c/en/us/products/collateral/switches/catalyst-2960-x-series-switches/data_sheet_c78-728232.html

HTH

Beginner

We need to know what features

We need to know what features/commands are available with LAN Base 15.2.2E5 MD.

The Cisco Navigator site does not provide any information for this IOS when used with the 2960X

Highlighted
Engager

I hope this will help you

I hope this will help you

http://www.cisco.com/c/en/us/support/switches/catalyst-2960-x-series-switches/products-installation-and-configuration-guides-list.html

Please rate useful posts & remember to mark any solved questions as answered. Thank you.
Beginner

Thank you Bilal.

Thank you Bilal.

I think until the Cisco Navigator is working properly this is the best information available.

CreatePlease to create content
Content for Community-Ad