08-22-2018 04:10 AM - edited 03-08-2019 03:57 PM
We have 2 3650 switches in stack. i m unable to login standby stack member (switch2) using command "session" as advised in documents.
Please advise how to login standby/stack members from active switch and commands.
IOS - Denali 16.3.5 IOS versions - ipservicesk9 - WS-C3650-48PD
regards
Gokul K
08-22-2018 04:33 AM
Hi
It should work from the master switch using session <switch number>
08-22-2018 05:24 AM - edited 08-22-2018 05:24 AM
Its not working in 3650. please find output below.
Switch#session
% Bad IP address or host name% Unknown command or computer name, or unable to find computer address
Switch#
Switch#
Switch#session ?
% Unrecognized command
Switch#session switch2
^
% Invalid input detected at '^' marker.
Switch#session 2
% Bad IP address or host name% Unknown command or computer name, or unable to find computer address
Switch#
Switch(config)#session
^
% Invalid input detected at '^' marker.
Switch(config)#
Switch#
Switch#sh sw
Switch/Stack Mac Address : YYYYYY - Local Mac Address
Mac persistency wait time: Indefinite
H/W Current
Switch# Role Mac Address Priority Version State
------------------------------------------------------------
*1 Active XXX 15 V05 Ready
2 Standby XXX 10 V05 Ready
08-22-2018 06:34 AM
cannot find docu for it,
but maybe this command does not work from a telnet/ssh session, only from the physical consoleport on the active master?
08-22-2018 06:40 AM - edited 08-22-2018 06:48 AM
I thought found it!
first you must start TWO remote session to the same switch
then from one of those sessions you can "session #" to a specific member
but this is not correct.
the session command is active on an old stack using c3750-ipbasek9-mz.122-55.SE10.bin
#session ?
<1-9> Switch number
but not on a modern stack using Cisco IOS XE Software, Version 16.06.04
#session ?
% Unrecognized command
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide