3750 vs 3650 QOS Bandwidth Limitation

[JHaynes4B]

Hi,

When configuring QOS on the 3750 switch the following message is displayed when looking at the queueing configuration of an interface;

Shaped queue weights (absolute) : 25 0 0 0
Shared queue weights : 1 30 35 5
The port bandwidth limit : 100 (Operational Bandwidth:100.0)
The port is mapped to qset : 1

This is even though the port is gigabit.

My question is does the 3650 switch switch have the same limitation? I do not see anywhere to view the information on the port.

Thanks.

[Georg Pauwen]

Hello,

I think you can view that information with the command (change the interface as you see fit):

3650G#sh mls qos interface gi 0/7 queueing

[JHaynes4B]

The 3850 and 3650 moved away from the mls commands:

WS-C3850-48T#sh mls ?
% Unrecognized command

[Reza Sharifi]

Hi,

What command produced this output on a 3750?  I don't see the same command on the new 3650 series.

HTH

[Georg Pauwen]

Actually, I think the command I mentioned is available on the 3750 and the 3850 in Denali:

sh mls qos interface gi 0/1 queueing

GigabitEthernet0/1
Egress Priority Queue : enabled
Shaped queue weights (absolute) : 25 0 0 0
Shared queue weights : 10 10 60 20
The port bandwidth limit : 100 (Operational Bandwidth:100.0)
The port is mapped to qset : 2