I have two 3850's and one of them is not accepting traffic from the other one.
Switch 1 (G Pod) - all of the trunk ports on this one are working when connecting to other switches except for the one in H Pod (Switch 2). The other switches that connect to this switch are 3560's.
Interface status:
Gi1/0/40 Fees-IDF8-H-Pod notconnect 1 auto auto 10/100/1000BaseTX
Gi1/0/41 *** HOST PORT (END connected 1 a-full a-100 10/100/1000BaseTX
Gi1/0/42 *** HOST PORT (END connected 1 a-full a-100 10/100/1000BaseTX
Gi1/0/43 Fees-G3 connected trunk a-full a-1000 10/100/1000BaseTX
sh cdp n (clipped)
Fees_G3.tempe3 Gig 1/0/43 135 S I WS-C3560C Gig 0/10
The interface on G Pod is:
interface GigabitEthernet1/0/40
description Fees-IDF8-H-Pod
switchport mode trunk
udld port aggressive
macro description cisco-switch
spanning-tree portfast disable
spanning-tree link-type point-to-point
interface GigabitEthernet1/0/43
description Fees-G3
switchport mode trunk
udld port aggressive
macro description cisco-switch
spanning-tree portfast disable
spanning-tree link-type point-to-point
Switch 2 (H Pod)
Interface is:
interface GigabitEthernet1/0/48
description Fees-IDF2-G-pod
switchport mode trunk
udld port aggressive
macro description cisco-switch
spanning-tree portfast disable
spanning-tree link-type point-to-point
Interface status:
Port Name Status Vlan Duplex Speed Type
Gi1/0/48 Fees-IDF2-G-pod notconnect 1 auto auto 10/100/1000BaseTX
Why is the port on H Pod not connecting as a trunk port?
