07-15-2014 10:34 AM - edited 03-07-2019 08:04 PM
Hi,
I need to upgrade a new 4507 and was looking for more information. Does this unit run CatOS or just IOS? Are all of the line cards needing upgrades as well as the OS? Any other info helpful.
Thanks.
Solved! Go to Solution.
07-15-2014 11:07 AM
Hey,
It should be IOS and you just need to upgrade the supervisor code.
You may upgrade by copying the image to bootflash of the switch and changing the boot variables, however if you have dual supervisor engine you may use ISSU procedure:
http://www.cisco.com/c/en/us/td/docs/switches/lan/catalyst4500/15-1/XE_330SG/configuration/guide/config/issu.html
HTH.
Regards,
RS.
07-15-2014 11:07 AM
Hey,
It should be IOS and you just need to upgrade the supervisor code.
You may upgrade by copying the image to bootflash of the switch and changing the boot variables, however if you have dual supervisor engine you may use ISSU procedure:
http://www.cisco.com/c/en/us/td/docs/switches/lan/catalyst4500/15-1/XE_330SG/configuration/guide/config/issu.html
HTH.
Regards,
RS.
07-21-2014 08:43 AM
Thank you.
Find answers to your questions by entering keywords or phrases in the Search bar above. New here? Use these resources to familiarize yourself with the community: