03-06-2013 10:32 PM - edited 03-07-2019 12:06 PM
Hi all.
I have a really weired thing happening on 6509 device with one of my customers.
The device has a SUP 2 (MSFC2) with version 12.2.18SXF17B.
Now the problem is: any VLAN interface once administratively down or simply down shows on "show interface status" output as VLAN.
While it supposed to show "Routed"
However once the port is up it is shows "routed" like it should.
Anybody has experience with this kid of thing?
03-06-2013 10:37 PM
Hi Dima,
Can you paste the output of vlan which u r refering to so that it would clear us on your query?
Regards
Inayath
03-06-2013 10:52 PM
Sure there goes:
Port Name Status Vlan Duplex Speed Type
Gi5/1 connected routed a-full a-1000 10/100/1000BaseT
same port when disconnected:
6500#sh int gigabitEthernet 5/1 status
Port Name Status Vlan Duplex Speed Type
Gi5/1 notconnect 1 full auto 10/100/1000BaseT
When the port is down it is not shown as routed.
03-06-2013 11:53 PM
Hi dima,
You are seeing is what expected.
Plz see the explanation:
6500#sh int status
Gi4/4 notconnect routed full 1000 No Transceiver
int vlan 1 <<<<
no shut
2- If I shut the default vlan 1 then i dont see the interface to be routed.
6500#int vlan 1
6500# shut
6500#sh int status
Gi4/4 notconnect 1 full 1000 No Transce <<<<
HTH
Regards
Inayath
*Plz rate the usefull posts.
03-06-2013 11:09 PM
Hi
have u configured any ip address on this port
Sent from Cisco Technical Support iPhone App
03-11-2013 04:04 AM
nope IP address have not been configured on the port.
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide