06-28-2020 07:34 AM
HI Team ,
we are getting high utilization on 6509 switch and could someone help on this?
=~=~=~=~=~=~=~=~=~=~=~= PuTTY log 2020.06.28 19:21:02 =~=~=~=~=~=~=~=~=~=~=~=
sh module
Mod Ports Card Type Model Serial No.
--- ----- -------------------------------------- ------------------ -----------
1 48 CEF720 48 port 10/100/1000mb Ethernet WS-X6748-GE-TX SAL1343222E
2 48 CEF720 48 port 10/100/1000mb Ethernet WS-X6748-GE-TX SAD114400Z6
3 48 CEF720 48 port 10/100/1000mb Ethernet WS-X6748-GE-TX SAL1702WLBT
4 48 CEF720 48 port 10/100/1000mb Ethernet WS-X6748-GE-TX SAL10436CEM
5 2 Supervisor Engine 720 (Hot) WS-SUP720-3B SAL12394GMJ
6 2 Supervisor Engine 720 (Active) WS-SUP720-3B SAD0922023R
7 48 CEF720 48 port 10/100/1000mb Ethernet WS-X6748-GE-TX SAL1204EBBU
8 24 CEF720 24 port 1000mb SFP WS-X6724-SFP SAL161171LF
Mod MAC addresses Hw Fw Sw Status
--- ---------------------------------- ------ ------------ ------------ -------
1 0023.eba7.6ed0 to 0023.eba7.6eff 3.4 12.2(18r)S1 12.2(33)SXI1 Ok
2 001e.1356.0a04 to 001e.1356.0a33 2.11 12.2(14r)S5 12.2(33)SXI1 Ok
3 fc99.475d.3f0c to fc99.475d.3f3b 4.2 12.2(18r)S1 12.2(33)SXI1 Ok
4 0019.56f0.068c to 0019.56f0.06bb 2.9 12.2(14r)S5 12.2(33)SXI1 Ok
5 001a.a22d.3f90 to 001a.a22d.3f93 5.7 8.5(2) 12.2(33)SXI1 Ok
6 0011.9202.0514 to 0011.9202.0517 4.4 8.1(3) 12.2(33)SXI1 Ok
7 001c.584c.0654 to 001c.584c.0683 2.9 12.2(14r)S5 12.2(33)SXI1 Ok
8 c464.13c6.e7f0 to c464.13c6.e807 5.1 12.2(18r)S1 12.2(33)SXI1 Ok
Mod Sub-Module Model Serial Hw Status
---- --------------------------- ------------------ ----------- ------- -------
1 Centralized Forwarding Card WS-F6700-CFC SAL134324NG 4.1 Ok
2 Centralized Forwarding Card WS-F6700-CFC SAL1521E1JD 4.1 Ok
3 Centralized Forwarding Card WS-F6700-CFC SAL1703WW9V 4.1 Ok
4 Centralized Forwarding Card WS-F6700-CFC SAD11080AEB 3.1 Ok
5 Policy Feature Card 3 WS-F6K-PFC3B SAL123948Q4 2.4 Ok
5 MSFC3 Daughterboard WS-SUP720 SAL1239487N 3.2 Ok
6 Policy Feature Card 3 WS-F6K-PFC3B SAD092103M1 2.1 Ok
6 MSFC3 Daughterboard WS-SUP720 SAD092005N5 2.3 Ok
7 Centralized Forwarding Card WS-F6700-CFC SAL1205EJBK 4.1 Ok
8 Centralized Forwarding Card WS-F6700-CFC SAL161175T3 4.1 Ok
Mod Online Diag Status
---- -------------------
1 Pass
2 Pass
3 Pass
4 Pass
5 Pass
6 Pass
--More-- 7 Pass
8 Pass
IILINMUMCSW01#sh plat
IILINMUMCSW01#sh platform netint
Network IO Interrupt Throttling:
throttle count=141941 (0 in multicast fs), timer count=141941
active=0, configured=1
netint usec=4000, netint mask usec=800
resource netint mask usec=400
inband_throttle_mask_hi = 0x0
inband_throttle_mask_lo = 0x800000
SPD-drop triggered throttles=201
SPD triggered unthrottles=19
Max SPD throttle time=4000 usecs
Buffer depletion triggered throttles=0
ARP queue triggered throttles=0
Low inband activity:throttles=133892, active=0, min=5 pkts/6000 bytes, 1000 usec
Low activity threshold 1500 pps (192)
Current rx packet rate 226 pps (29)
Idle hook unthrottles=1852
06-29-2020 06:14 AM
Hello @Muthukumar P ,
upgrade to a standard IOS version not a modular one like the one that is running now, the SXJ suggested by @Leo Laohoo should be fine.
Hope to help
Giuseppe
06-29-2020 10:56 AM
Its time for an upgrade to new code which gives you more breath time for Cisco 6509 (one of the greatest product still runs) - also check the support model, also request a business time for a move to next model.
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide