09-19-2012 01:39 AM - edited 03-07-2019 08:57 AM
Hello Everyone,
We have a design of two 6509 running in a VSS with dual supervisor each having fthree 10/100/1000mb etherner modules.
We have diagnosed a wierd problem that none of the switchports in module 1 and 2 on either switches are having layer2/layer 3 connectivity.
Tried everything from changing the cables to changing the end device but no luck with it.
Module results show pass and no errors in the logging.
Just wondering if anyone has encountered this problem earlier? Help would be appreciated.
09-19-2012 01:39 AM
Running Image
sup-bootdisk:s72033-ipservicesk9_wan-mz.122-33.SXI2a.bin
09-19-2012 05:32 AM
Hi,
#show module switch all
#show diagnostic result switch <switch number> module <module number> detail
#show switch virtual redundancy
#show redundancy states
#show power switch all
For your information, i am sharing the HW requirement once again here,
Refer:
Virtual Switching System (VSS) Q&A
http://www.cisco.com/en/US/prod/collateral/switches/ps5718/ps9336/prod_qas0900aecd806ed74b.html
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide