cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
395
Views
0
Helpful
5
Replies

About Cisco Switch Stack

Smile丶
Level 1
Level 1

I have some question about Cisco Stack.

1.Do I need the same model, license and IOS software versions to stack between 9300 sku?

2.How many C9606R can I stack?

3.Can I do virtual stacking on channelports.For example,if I make 8 ports of the same type on two C9606R line cards into channelport, can I create stacked links on these two channelports?

5 Replies 5

Leo Laohoo
Hall of Fame
Hall of Fame

@Smile丶 wrote:
Do I need the same model, license and IOS software versions to stack between 9300 sku?
  1. 9300L can only be stacked with another 9300L. 
  2. 9300L cannot be stacked with a plain 9300 nor 9300X. 
  3. Same firmware version.
  4. Install mode or Bundle mode and not both.

Leo Laohoo
Hall of Fame
Hall of Fame

@Smile丶 wrote:
2.How many C9606R can I stack?

Two

Thanks for your reply, as I write the third question,can I create a stacked link on  two channelports(have 8 ports).

Leo Laohoo
Hall of Fame
Hall of Fame

@Smile丶 wrote:
3.Can I do virtual stacking on channelports.For example,if I make 8 ports of the same type on two C9606R line cards into channelport, can I create stacked links on these two channelports?

IF there is a VSS pair, a Port Channel with 5 physical ports from switch 1 and 3 ports from switch 2 can be configured.

Thkans for your reply!Sorry,I still have a doubt that why both switches dont make a Port-Channel with 8 physical ports?

Five on one side and three on the other. Isn't the speed at both ends different?

Thanks again!

Review Cisco Networking for a $25 gift card