06-04-2012 10:52 PM - edited 03-07-2019 07:04 AM
Hi,
I'm looking for help as I'm getting this error message on syslog server (Kiwi syslog)
access-list logging rate-limited or missed XXXX packets
i did the following commands but still I'm getting the error :
logging buffered 16386 debugging
logging rate-limit all 5000
no logging console
no logging monitor
ip access-list logging interval 30000
ip access-list log-update threshold 30000
i don't want to report to the console or monitor i want to report direct to syslog server, because I'm monitoring all the traffic (permit ip any any log) !
Thanks for your help,
Rabih
06-05-2012 12:38 AM
You hav esyslog ratelmiting configured:
logging rate-limit all 5000
It is doing its job. You can try tuning paparameters to get better loggin on syslog server.
Nik
06-05-2012 11:08 AM
Hi Nik,
Thanks for your support, please can you help me on parameteres as i already added the command:
logging rate-limit all 5000 but still i'm getting this error:
access-list logging rate-limited or missed XXXX packets
Thanks,
Rabih
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide