Adding IP routing address

[rcowheraocat]

I am using a PIX ASA5500 network appliance. And I am using the ASDM software to configure it. My question should be simple to answer.

I have an "example" 192.168.0.1/24 255.255.255.0 I am out of IP address and I need to add more I would like to add 192.168.1.1/24 255.255.255.0 and 192.168.2.1/24 255.255.255.0.

Can someone please help with this it has to easy to do I just don't know how and this is my first router I have ever had to setup.

PS and I am worthless at the command line interface.

[noroutes4u]

Are you trying to add more address to use in your global nat or are you adding another interfaces to use those address?

[jaipal]

Hello,

It will be too complicated while on trouble shooting any issues, you can try a class B subnet to over come this issue.

[evsrajatgupta]

Hi rcowheraocat,

(please Rate)

you can use VLSM in this csae.

I below link will help you to understand VSLM

http://www.cisco.com/warp/public/701/3.html

And this link will help you in VLSM CIDR Subnet Calculator

http://www.vlsm-calc.net/

[Rick Morris]

change your netmask

To allow for 192.168.0.0 - 192.168.3.255 use 255.255.252.0