ARP issue

[cecilmayy]

Having issue with arp, I have to clear arp on my router 2951 to establish connectivity. I have a 2951 with sub-interfaces, one of my sub-interface is connected to my ASA logically as Inside and I configured  a bridge group on my ASA. vlan 215/216 inside outside respectively. No rules on ASA permit any any. Here is my problem I can ping from outside to my BVI IP on ASA. But can't ping my gateway on router until I clear ip arp on router. After a reboot of the PC, I try to ping the gateway again with no success until I clear arp on the router. Before clearing the arp on the router there was an entry for the pc with the correct MAC. None firewall traffic works great. 

[Dennis Mink]

Cecil

Can you post the ASA's config, I dont quite follow why you have done the bridge on the ASA as you state. If possible also a picture of the network design,

thanks