About cecilmayy

cecilmayy · 02-15-2022

If my ACL for QoS is: example ip access-list extended SET-AF41 remark High Pri permit tcp any any eq 80 class-map xxxx match access-list extended SET-AF41set af41 1. TCP Ephemeral Source Port 32222, Destination Port 80. Matches the ACL and MARKED pac...

cecilmayy · 10-08-2021

IOS XE Gibraltar 16.12.x (Catalyst 3650 Switches) support ERSPAN.Can I send ERSPAN destination to a local RSPAN vlan on the destination switch. The command are available but I could not find any documentation to support the theory. CORE- (config) #mo...

cecilmayy · 12-17-2018

The CSCvm94513 states that it does not affect 5500 Wireless LAN Controller, but on the details section of the CSCvm94513 it states: Known Affected Releases: (2) 8.8(100.0) 8.9(1.172) Known Fixed Releases: (3) 8.9(1.213) 8.8(114.47) 8.8(110.1) But...

cecilmayy · 11-05-2015

Having issue with arp, I have to clear arp on my router 2951 to establish connectivity. I have a 2951 with sub-interfaces, one of my sub-interface is connected to my ASA logically as Inside and I configured a bridge group on my ASA. vlan 215/216 ins...

cecilmayy · 01-13-2009

I have been trying to connect two router together for a lab both has a VWIC-T1 2MFT card i can't get it to work. can someone help?

cecilmayy · 02-15-2022

Thanks for your time, Jon. What I meant to say is that its difficult to craft and return Http/https return packet ACL because the return packet will have random ports as it destination ports (1024–65535) ip access-list extended SET-AF41 remark High P...

cecilmayy · 02-15-2022

Jon, I don't think this ACL will make any difference, Maybe NBAR will or a different ACL with source IP and destination without ports numbers on both ends. Although it will be wide open. ip access-list extended SET-AF41 remark High Pri permit tcp ...

cecilmayy · 08-28-2019

Can I disable the AUX port on the 2802I, if so, how?

cecilmayy · 11-28-2017

I've the same issue with a 2951 Rtr. ▒B▒▒▒C▒▒▒z▒Ό▒B▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒...

cecilmayy · 01-13-2009

what do youe mean by back to back? from one router to the other if that yes.i was using a UTP Xover cable. i don't have any config yet.

Member Since	‎03-09-2006 06:31 AM
Date Last Visited	‎02-22-2022 01:26 PM
Posts	27

User Statistics

User Activity

QoS with Ephemeral port

ERSPAN (Catalyst 3650 Switches)

CSCvm94513 - Cisco WLC Vulnerable to libssh Server-Side State Machine Unauthorized Access Vulnerability

ARP issue

Connection 2 Router using VWIC-T1 2MFT card

Re: QoS with Ephemeral port

Re: QoS with Ephemeral port

Re: 2802I AUX port functionality

Re: Thank you Rick. I did try

Re: Connection 2 Router using VWIC-T1 2MFT card