10-16-2008 05:46 AM - edited 03-06-2019 01:57 AM
Hi,
Please let me know is there any show command which will help to get the backplane speed of switch 6509 with sup 720.
If there is no show command please provide a link for that.
Also what exactly the command "sh fabric status " shows.
Is the command dispalys the Supervisor fabric capacity ?
If there is no Switch fabric Module installed in the switch will the command have any output.
Kindly help
10-16-2008 08:02 AM
All sup 720's have a built in fabric module I believe so that should be a valid command.
10-16-2008 09:48 AM
Hi,
Please let me know how we can see backplane speed ?
Is inbuilt switch fabric same as backplane ?
Thanks
10-16-2008 10:12 AM
The potential backplane speed in a 6509 running Sup720 can be up 360Gbps (720Gbps full-duplex 'marketing').
The modules installed in the switch play a big role in achieving the speed.
For more information on the 6500 switch architecture, please take a moment and read this document:
HTH,
__
Edison.
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide