Switching

Hi All,Where is the IOS/bin file for the 3825 stored?  I know if there is a compact flash card loaded it can be stored there.  Can it be placed anywhere else besides the compact flash?Thanks

Hi,We have an application seeking for all testing equipment device on UDP port 43968 but it doesn't seems to work in our network. Would ip helpder-address can help? our core switch is 6509. please adviceThanks.

I have 2 Catalyst 3560 PoE-48 Linked with the SFP ports, I was trying to go from another one of the SFP ports to the router a Cisco 2821 using a Gigabit SFP transceiver MGBT1.  I am not sure if the transceiver is incompatible with the switch or if I ...

does anyone know an easy way i can check if i am running my Sup32s in Hybrid or Native mode?  i understand the diference from an architecture standpoint, but how do i tell what mode they are in? Thanks in advance for your help!

Ethernet as a Access method for Dedicated Internet Services is becoming increasingly more popular. Would appreciate a discussion on packet processing performance for Ethernet interfaces.For example: An 1841 that may have two FastEthernet interfaces m...

Recently I performed a workbook lab with a question about custom queueing. The question was to give a percentage bandwidth to 4 types of traffice20% FTP (1500bytes)30% HTTP (600bytes)40% UDP5001 (300 bytes)10% all that is leftThe bandwidth is devided...

Hello,We recently installed 2 new memory modules, replacing the old ones. I need to know if our Cisco 7200 is recognizing them, but I just can get the total amount of memory installed/used. Is there any way to know separately how much memory is each ...

Hello all,My company recently added a Proxim wireless device to our network as a backup link to a remote location. We are using a 3560 layer 3 switch with OSPF turned on. I get dropped packets when I connect the PROXIM's ethernet interface to the rou...

Hi Guys. I hope I’m in the right place, if not please point me to the correct forum section for the questions below. We have a Cisco 1750, and we like to test this router for a product called VPN lite.http://www.telkom.co.za/products_services/vpnlite...

I have a need to stop UDP broadcast traffic on port 10006 between 2 ports on a Cisco Catalyst 2950 12 port switch.  What is the simplest way to do this ?