12-09-2012 07:06 AM - edited 03-07-2019 10:29 AM
Dear Friends.
I need to use cisco 3750E switch on core. I want to know whether BGP is supported on this model or not?
Currently i have c3750e-universalk9-mz.150-2.SE/c3750e-universalk9-mz.150-2.SE.bin" preinstalled. and i checked BGP is not supported on this IOS image. Please help me.
Solved! Go to Solution.
12-09-2012 07:28 AM
Yes, from sh ver your license level is IP base
License Level: ipbase
License Type: Permanent
Talk to your sales guy, and purchase IP Services license. That is all you need. You don't need to change the IOS.
HTH
12-09-2012 08:07 AM
You don't need to upgrade. You are already running one of the latest version. Upgrading is not going to enable IP Services license. You would need to buy the license and install it on the switch.
You can use this link to get a 90 trail license. This gives enough time to purchase the permanent license.
https://tools.cisco.com/SWIFT/LicensingUI/Home
HTH
12-09-2012 07:21 AM
Hi,
BGP is supported on 3750 series switches, but you need IP Services license before you can enable it.
You probebly currently have IP Base license
can you post "sh lice" and "sh ver"?
HTH
12-09-2012 07:25 AM
Please find the show version output.
Switch>sh ver
Cisco IOS Software, C3750E Software (C3750E-UNIVERSALK9-M), Version 15.0(2)SE, RELEASE SOFTWARE (fc1)
Technical Support: http://www.cisco.com/techsupport
Copyright (c) 1986-2012 by Cisco Systems, Inc.
Compiled Fri 27-Jul-12 23:26 by prod_rel_team
ROM: Bootstrap program is C3750E boot loader
BOOTLDR: C3750E Boot Loader (C3750X-HBOOT-M) Version 12.2(53r)SE2, RELEASE SOFTWARE (fc1)
Switch uptime is 2 days, 1 hour, 13 minutes
System returned to ROM by power-on
System image file is "flash:c3750e-universalk9-mz.150-2.SE/c3750e-universalk9-mz.150-2.SE.bin"
This product contains cryptographic features and is subject to United
States and local country laws governing import, export, transfer and
use. Delivery of Cisco cryptographic products does not imply
third-party authority to import, export, distribute or use encryption.
Importers, exporters, distributors and users are responsible for
compliance with U.S. and local country laws. By using this product you
agree to comply with applicable laws and regulations. If you are unable
to comply with U.S. and local laws, return this product immediately.
A summary of U.S. laws governing Cisco cryptographic products may be found at:
http://www.cisco.com/wwl/export/crypto/tool/stqrg.html
If you require further assistance please contact us by sending email to
export@cisco.com.
License Level: ipbase
License Type: Permanent
Next reload license Level: ipbase
cisco WS-C3750X-24P (PowerPC405) processor (revision A0) with 262144K bytes of memory.
Processor board ID FDO1638R2G0
Last reset from power-on
1 Virtual Ethernet interface
1 FastEthernet interface
28 Gigabit Ethernet interfaces
2 Ten Gigabit Ethernet interfaces
The password-recovery mechanism is enabled.
512K bytes of flash-simulated non-volatile configuration memory.
Base ethernet MAC Address : E4:D3:F1:34:FD:80
Motherboard assembly number : 73-12551-06
Motherboard serial number : FDO16381TLM
Model revision number : A0
Motherboard revision number : A0
Model number : WS-C3750X-24P-S
Daughterboard assembly number : 800-32727-03
Daughterboard serial number : FDO16380YQX
System serial number : FDO1638R2G0
Top Assembly Part Number : 800-31325-03
Top Assembly Revision Number : B0
Version ID : V03
CLEI Code Number : COMJR00ARC
Hardware Board Revision Number : 0x04
Switch Ports Model SW Version SW Image
------ ----- ----- ---------- ----------
* 1 30 WS-C3750X-24P 15.0(2)SE C3750E-UNIVERSALK9-M
Configuration register is 0xF
12-09-2012 07:28 AM
Yes, from sh ver your license level is IP base
License Level: ipbase
License Type: Permanent
Talk to your sales guy, and purchase IP Services license. That is all you need. You don't need to change the IOS.
HTH
12-09-2012 07:44 AM
Thanks Reza...
Can i upgrade IOS image rather than purchasing IP Services license? We dont have enough time to chase.
12-09-2012 08:07 AM
You don't need to upgrade. You are already running one of the latest version. Upgrading is not going to enable IP Services license. You would need to buy the license and install it on the switch.
You can use this link to get a 90 trail license. This gives enough time to purchase the permanent license.
https://tools.cisco.com/SWIFT/LicensingUI/Home
HTH
12-09-2012 08:58 AM
Rajeev,
If the answers have been helpful, please rate the post and mark it as answered so others can benefit from it.
12-09-2012 09:03 AM
Thanks for your great help.
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide