cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
Announcements

Ask the Expert- SD-WAN

1136
Views
0
Helpful
3
Replies
Beginner

boot image 15.1.1 upgrade

In   our test environment I upgraded Sups 720 to Sups 2T. The Sups 2T came with IOS   15.0.1. Looking at to the latest IOS; I found IOS 15.5.1. I upgraded to this   version and things seem to be working OK. In the web site, there is also   image s2t54-boot-mz.SPA.151-1.SY.bin. Do I need to   upgrade the boot image as well? If so, how do I do this? I haven’t been able   to find information in Cisco’s web info.

Bootvar nor version commands show me which boot   image the supervisors 2T are running.

Thank you for any information.

Router#show bootvar

BOOT variable =   bootdisk:s2t54-adventerprisek9-mz.SPA.151-1.SY.bin,1;

CONFIG_FILE variable =

BOOTLDR variable =

Configuration register is 0x2102

Standby BOOT variable =   bootdisk:s2t54-adventerprisek9-mz.SPA.151-1.SY.bin,1;

Standby CONFIG_FILE variable =

Standby BOOTLDR variable =

Standby Configuration register is 0x2102

Router#show ver

Cisco IOS Software, s2t54 Software (s2t54-ADVENTERPRISEK9-M), Version 15.1(1)SY, RELEASE SOFTWARE (fc2)

Technical Support: http://www.cisco.com/techsupport

Copyright (c) 1986-2012 by Cisco Systems, Inc.

Compiled Tue 09-Oct-12 14:43 by prod_rel_team

ROM: System Bootstrap, Version 12.2(50r)SYS2, RELEASE SOFTWARE (fc1)

Router uptime is 1 hour, 49 minutes

Uptime for this control processor is 1 hour, 50 minutes

System returned to ROM by reload at 18:50:50 UTC Thu Nov 22 2012

System image file is "bootdisk:s2t54-adventerprisek9-mz.SPA.151-1.SY.bin"

Last reload reason: Reload Command

This product contains cryptographic features and is subject to United

States and local country laws governing import, export, transfer and

use. Delivery of Cisco cryptographic products does not imply

third-party authority to import, export, distribute or use encryption.

Importers, exporters, distributors and users are responsible for

compliance with U.S. and local country laws. By using this product you

agree to comply with applicable laws and regulations. If you are unable

to comply with U.S. and local laws, return this product immediately.

A summary of U.S. laws governing Cisco cryptographic products may be found at:

http://www.cisco.com/wwl/export/crypto/tool/stqrg.html

If you require further assistance please contact us by sending email to

export@cisco.com.

cisco WS-C6509-V-E (M8572) processor (revision ) with 1785856K/262144K bytes of memory.

Processor board ID FOX1338GSWR

CPU: MPC8572_E, Version: 2.1, (0x80E80021)

CORE: E500, Version: 3.0, (0x80210030)

CPU:1500MHz, CCB:600MHz, DDR:600MHz

L1:   D-cache 32 kB enabled

       I-cache 32 kB enabled

Last reset from s/w reset

2 Virtual Ethernet interfaces

44 Gigabit Ethernet interfaces

12 Ten Gigabit Ethernet interfaces

2543K bytes of non-volatile configuration memory.

Configuration register is 0x2102

Everyone's tags (3)
3 REPLIES 3
Highlighted
Beginner

boot image 15.1.1 upgrade

I too have upgraded my SUP2T with this version:

s2t54-ipservicesk9_npe-mz.SPA.151-1.SY.bin

I can not find any documentation either how install this file:

s2t54-boot-mz.SPA.151-1.SY.bin

Is this the Bootstrap file? On the cisco download site this file is found under IOS Boot Images.

s

My current version I would like to upgrade:

ROM: System Bootstrap, Version 12.2(50r)SYS3, RELEASE SOFTWARE (fc1)

Beginner

boot image 15.1.1 upgrade

Hi all,

Did you find more information about this s2t54-boot-mz.SPA.151-1.SY.bin.

Do i need to upgrade thiesBOOT IMAGE

Could you pleas share some documents?

Thanks

Cisco Employee

Re: boot image 15.1.1 upgrade

Nope, don't need it. Example, if you want upgrade to 15.1.1sy1 that came out a few weeks ago, just download it to your flash, change boot statement and reload, that's it.

Sent from Cisco Technical Support iPad App

CreatePlease to create content
Content for Community-Ad
July's Community Spotlight Awards