cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
3870
Views
0
Helpful
4
Replies

built a stack WS-C3750X-24S-E and WS-C3750X-24T-L

Jan Krcmar
Level 1
Level 1

Dear all.

We have a problem with a stack // two switches.

WS-C3750X-24S-E  &  WS-C3750X-24T-L

Both switches have the same IOS.

WS-C3750X-24S-E

**********************

Switch Ports Model              SW Version            SW Image

------ ----- -----              ----------            ----------

*    1 30    WS-C3750X-24       15.0(1)SE             C3750E-UNIVERSALK9-M

WS-C3750X-24T-L

*********************

Switch Ports Model              SW Version            SW Image

------ ----- -----              ----------            ----------

*    1 30    WS-C3750X-24S      15.0(1)SE             C3750E-UNIVERSALK9-M

The reason for the problem is different major version

*Mar  1 00:00:25.358: %STACKMGR-5-MAJOR_VERSION_MISMATCH: Major Version Mismatch (Local 1 - Received 6) with neighbor-0

*Mar  1 00:00:25.358: %STACKMGR-5-MAJOR_VERSION_MISMATCH: Major Version Mismatch (Local 1 - Received 6) with neighbor-1

WS-C3750X-24S-E

**********************

Switch   Master/   Mac Address          Version    Current

Number   Member                          (maj.min)  State

-----------------------------------------------------------

1        Master    0007.7d3c.b280          1.46        Ready

WS-C3750X-24T-L

*********************

Switch   Master/   Mac Address          Version    Current

Number   Member                          (maj.min)  State

-----------------------------------------------------------

1        Master    44d3.ca7d.1000          6.46        Ready

How can we upgrade the WS-C3750X-24S-E to the same major version??

Thanks in advance for your help.

Jan

4 Replies 4

Leo Laohoo
Hall of Fame
Hall of Fame

Firstly, stay away from 15.0(1)SE IOS.  It's got a memory leak like you can't imagine.

Try to use the 12.2(58)SE2 and see if you have the same issue.

Another thing, I believe one of your switch's product code ends with an "L".  I believe this model has an IP Base License while the other model with the "E" has a higher license and this could be the issue.

Can you please post the complete output for the command "sh license".

Hi.

you are right.

the WS-C3750X-24T-L 

Index 1 Feature: ipservices

        Period left: 8  weeks 4  days

        License Type: Evaluation

        License State: Active, Not in Use, EULA not accepted

        License Priority: None

        License Count: Non-Counted

Index 2 Feature: ipbase

        Period left: 0  minute  0  second

Index 3 Feature: lanbase

        Period left: Life time

        License Type: Permanent

        License State: Active, In Use

        License Priority: Medium

        License Count: Non-Counted

and the WS-C3750X-24S-E

Index 1 Feature: ipservices

        Period left: Life time

        License Type: Permanent

        License State: Active, Not in Use

        License Priority: Medium

        License Count: Non-Counted

Index 2 Feature: ipbase

        Period left: 0  minute  0  second

I found now -->

http://www.cisco.com/en/US/prod/collateral/switches/ps5718/ps6406/data_sheet_c78-584733.html

The Cisco Catalyst 3750-X Series Switches with LAN  Base feature set can only stack with other Cisco Catalyst 3750-X Series  LAN Base switches. A mixed stack of LAN Base switch with IP Base or IP  Services features set is not supported.

Do you know ... if we upgrade the LAN Base to IP Base on the WS-C3750X-24T-L. Will the stack work?

Thanks.

Hi,

Yes, it will work.. All the other switches in stack should have the same ip base license and IOS

I have attached a document for your reference.

Hope this helps

Cheers

Somu

Rate helpful posts

SunilKhanna
Level 1
Level 1

Hi Jan,

Here is a URL for upgrading an IOS on 3750 stack. Hope you find it useful when urgrading the IOS

Catalyst 3750 Software Upgrade in a Stack Configuration with Use of the Command-Line Interface

Regards,

Sunil

Regards, Sunil Khanna