02-02-2023 04:28 AM
C1000-16T-2G-LをAC100V環境下で使用した際の消費電力を知りたいです。
以下のサイトを参照しましたが、よく分かりません。
<<English>>
I would like to know the power consumption of C1000-16T-2G-L when used in an AC100V environment.
I referred to the following site but cannot figure it out.
https://www.cisco.com/c/en/us/products/collateral/switches/catalyst-1000-series-switches/nb-06-cat1k-ser-switch-ds-cte-en.html?oid =otren019232#Specifications
Solved! Go to Solution.
02-03-2023 01:25 AM
Yes, that are the values without PoE
02-02-2023 07:42 AM
table-2, column-3 (16-port)
AC100V instead of 110V makes no difference for power consumption(kVA) ,
but with a little higher current (A) (kVA = V*A/1000)
Electrical |
Full PoE |
Full PoE Ext. PS |
Full PoE |
Full PoE |
Full PoE |
||||||||||
Voltage (auto ranging) |
110 to 220V AC in |
110 to 220V AC in |
110 to 220V AC in |
110 to 220V AC in |
|||||||||||
Frequency |
50 to 60 Hz |
50 to 60 Hz |
50 to 60 Hz |
50 to 60 Hz |
|||||||||||
Current |
0.23A to 0.28A |
0.15A to 0.2A |
0.35A to 0.37A |
0.29A to 0.48A |
0.45A to 0.94A |
||||||||||
Power rating |
0.15 kVA |
0.15 kVA |
0.45 kVA |
0.8 kVA |
0.95 kVA |
02-02-2023 04:15 PM
Hi pieterh,
Thank you for your quick reply.
C1000-16T-2G-L" does not have PoE, so I assume the following values.
Is my understanding correct?
"Power rating(maximum consumption)" is "0.05kVA".
"Power consumption(watts)" is "16.68W" at 100% traffic.
Best regards,
Hitoshi Nomura
VTV Japan, Inc.
8-port models | 16-port models | 24-port models | 48-port models | |||||
Electrical | Data | Data Ext.PS | Data | Data Ext. PS | Data | FE Data | Data | FE Data |
Voltage (auto ranging) |
110 to 220V AC in | 110 to 220V AC in | 110 to 220V AC in | 110 to 220V AC in | ||||
Frequency | 50 to 60 Hz | 50 to 60 Hz | 50 to 60 Hz | 50 to 60 Hz | ||||
Current | 0.13A to 0.22A | 0.16A to 0.26A | 0.16A to 0.26A | 0.19A to 0.31A | 0.20A to 0.33A | 0.12A to 0.34A | 0.29A to 0.48A | 0.24A to 0.69A |
Power rating (maximum consumption) |
0.04 kVA | 0.017 kVA | 0.05 kVA | 0.05 kVA | 0.06 kVA | 0.02 kVA | 0.09 kVA | 0.035 kVA |
Power consumption (watts) |
Data | Data Ext.PS | Data | Data Ext. PS | Data | FE Data | Data | FE Data |
0% traffic | 14.04 | 13.15 | 14.52 | 14.4 | 1G: 15.84 | 11.22 | 1G: 27.37 | 21.41 |
- | - | - | - | 10G: 18 | - | 10G: 29.4 | - | |
10% traffic | 14.06 | 13.76 | 16.44 | 16.44 | 1G: 22.08 | 12.83 | 1G: 41.57 | 23.02 |
- | - | - | - | 10G: 24.48 | - | 10G: 42.28 | - | |
100% traffic | 14.26 | 14 | 16.68 | 16.68 | 1G: 22.8 | 17.15 | 1G: 53.66 | 23.03 |
- | - | - | - | 10G: 25.68 | - | 10G: 54.73 | - | |
Weighted average | 14.12 | 13.64 | 15.88 | 15.84 | 1G: 20.2 | 13.73 | 1G: 40.87 | 22.49 |
- | - | - | - | 10G: 22.7 | - | 10G: 42.1 | - |
02-03-2023 01:25 AM
Yes, that are the values without PoE
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide