05-09-2011 11:37 AM - edited 03-06-2019 04:58 PM
Can anyone please assist with an issue I am having with a c3560E
I am trying to enable layer 3 routing on this switch, but the IP routing command is unavailable e.g 'IP ?' doesn't list it. I'm using the "c3560e-universalk9-mz.122-55.SE1.bin" image and according to the Cisco Feature Navigator IP routing is available on this model. Can anyone point in the right direction for what im doing wrong???
Cheers
Zak
Solved! Go to Solution.
05-09-2011 12:44 PM
Hi
Yes the the 3560X is a licence based model.
ie there are three licenses.
Lan-base
Ip-base
Ip-services
WS-C3560-24P-L = Lanbase (the L in the end) this is a L2 device.
This means amongst other things that it can not do ip routing due to the licensing.
If you want to do routing with the Lanbase then you need to upgrade it with a new license to minimum IP-base.
Please grab a new licence and after relaod u shld be fine
05-09-2011 12:45 PM
Hi,
Guy, you're using LAN BASE license. You need to upgrade it.
####
License Level: lanbase
License Type: Permanent
####
HTH,
Toshi
05-09-2011 11:52 AM
Hi Zak,
Please post the output of "show running and show ip route". Please try "no ip routing". Does this command show up in running configuration? If yes then do "ip routing" again.
HTH,
Toshi
05-09-2011 11:53 AM
You should be able to enable routing from global config mode
config t
ip routing
05-09-2011 11:57 AM
Thanks for the replies.
IP Routing is simply not avaialble as a command (from global conf).
#ip routing
^
% Invalid input detected at '^' marker.
05-09-2011 12:00 PM
Hi,
You should try this:
Switch#config terminal
Switch(conf)#ip routing
HTH,
Toshi
05-09-2011 12:02 PM
Sorry I am doing it from global conf I just copy and pasted from the wrong screen!!
(config)#ip routing
^
% Invalid input detected at '^' marker.
05-09-2011 12:07 PM
Hi Zak,
Please try commands as follows:
Switch(conf)#no ip routing
Does it allow you to type above command?
Please post the output of "show sdm prefer" , "show running" and "show ip route"
Toshi
05-09-2011 12:13 PM
Its a brand new swtich that has no config on yet..
Cheers
Zak
(config)#no ip routing
^
% Invalid input detected at '^' marker.
#show sdm prefer
The current template is "desktop default" template.
The selected template optimizes the resources in
the switch to support this level of features for
8 routed interfaces and 1024 VLANs.
number of unicast mac addresses: 6K
number of IPv4 IGMP groups + multicast routes: 1K
number of IPv4 unicast routes: 8K
number of directly-connected IPv4 hosts: 6K
number of indirect IPv4 routes: 2K
number of IPv4 policy based routing aces: 0
number of IPv4/MAC qos aces: 0.5K
number of IPv4/MAC security aces: 1K
#show ip route
^
% Invalid input detected at '^' marker.
Building configuration...
Current configuration : 1582 bytes
!
version 12.2
no service pad
service timestamps debug datetime msec
service timestamps log datetime msec
no service password-encryption
!
hostname XXXXX
!
boot-start-marker
boot-end-marker
!
!
!
!
no aaa new-model
system mtu routing 1500
!
!
!
!
!
spanning-tree mode pvst
spanning-tree extend system-id
!
!
!
!
vlan internal allocation policy ascending
!
!
!
interface FastEthernet0
no ip address
!
interface GigabitEthernet0/1
!
interface GigabitEthernet0/2
!
interface GigabitEthernet0/3
!
interface GigabitEthernet0/4
!
interface GigabitEthernet0/5
!
interface GigabitEthernet0/6
!
interface GigabitEthernet0/7
!
interface GigabitEthernet0/8
!
interface GigabitEthernet0/9
!
interface GigabitEthernet0/10
!
interface GigabitEthernet0/11
!
interface GigabitEthernet0/12
!
interface GigabitEthernet0/13
!
interface GigabitEthernet0/14
!
interface GigabitEthernet0/15
!
interface GigabitEthernet0/16
!
interface GigabitEthernet0/17
!
interface GigabitEthernet0/18
!
interface GigabitEthernet0/19
!
interface GigabitEthernet0/20
!
interface GigabitEthernet0/21
!
interface GigabitEthernet0/22
!
interface GigabitEthernet0/23
!
interface GigabitEthernet0/24
!
interface GigabitEthernet1/1
switchport trunk encapsulation dot1q
switchport mode trunk
!
interface GigabitEthernet1/2
!
interface GigabitEthernet1/3
!
interface GigabitEthernet1/4
!
interface TenGigabitEthernet1/1
!
interface TenGigabitEthernet1/2
!
interface Vlan1
ip address x.x.x.x 255.255.248.0
!
ip http server
ip http secure-server
ip sla enable reaction-alerts
!
!
line con 0
line vty 5 15
!
end
05-09-2011 12:31 PM
Hi,
It's weird. Please post the outout of "show version" , "show license detail" and "show privilege".
Toshi
05-09-2011 12:35 PM
Cisco IOS Software, C3560E Software (C3560E-UNIVERSALK9-M), Version 12.2(55)SE1, RELEASE SOFTWARE (fc1)
Technical Support: http://www.cisco.com/techsupport
Copyright (c) 1986-2010 by Cisco Systems, Inc.
Compiled Thu 02-Dec-10 06:44 by prod_rel_team
Image text-base: 0x00003000, data-base: 0x02800000
ROM: Bootstrap program is C3560E boot loader
BOOTLDR: C3560E Boot Loader (C3560X-HBOOT-M) Version 12.2(53r)SE1, RELEASE SOFTWARE (fc1)
XXXXXX uptime is 4 hours, 37 minutes
System returned to ROM by power-on
System image file is "flash:/c3560e-universalk9-mz.122-55.SE1/c3560e-universalk9-mz.122-55.SE1.bin"
This product contains cryptographic features and is subject to United
States and local country laws governing import, export, transfer and
use. Delivery of Cisco cryptographic products does not imply
third-party authority to import, export, distribute or use encryption.
Importers, exporters, distributors and users are responsible for
compliance with U.S. and local country laws. By using this product you
agree to comply with applicable laws and regulations. If you are unable
to comply with U.S. and local laws, return this product immediately.
A summary of U.S. laws governing Cisco cryptographic products may be found at:
http://www.cisco.com/wwl/export/crypto/tool/stqrg.html
If you require further assistance please contact us by sending email to
License Level: lanbase
License Type: Permanent
Next reload license Level: lanbase
cisco WS-C3560X-24P (PowerPC405) processor (revision A0) with 262144K bytes of memory.
Processor board ID FDO1506P0YP
Last reset from power-on
1 Virtual Ethernet interface
1 FastEthernet interface
28 Gigabit Ethernet interfaces
2 Ten Gigabit Ethernet interfaces
The password-recovery mechanism is enabled.
512K bytes of flash-simulated non-volatile configuration memory.
Base ethernet MAC Address : C8:9C:1D:F3:FD:80
Motherboard assembly number : 73-12555-04
Motherboard serial number : FDO15070BSE
Model revision number : A0
Motherboard revision number : A0
Model number : WS-C3560X-24P-L
Daughterboard assembly number : 800-32786-01
Daughterboard serial number : FDO150601EY
System serial number : FDO1506P0YP
Top Assembly Part Number : 800-31329-01
Top Assembly Revision Number : A0
Version ID : V01
CLEI Code Number : COMJS00ARA
Hardware Board Revision Number : 0x02
Switch Ports Model SW Version SW Image
------ ----- ----- ---------- ----------
* 1 30 WS-C3560X-24P 12.2(55)SE1 C3560E-UNIVERSALK9-M
Configuration register is 0xF
#show license
Index 1 Feature: ipservices
Period left: 8 weeks 4 days
License Type: Evaluation
License State: Active, Not in Use, EULA not accepted
License Priority: None
License Count: Non-Counted
Index 2 Feature: ipbase
Period left: 0 minute 0 second
Index 3 Feature: lanbase
Period left: Life time
License Type: Permanent
License State: Active, In Use
License Priority: Medium
License Count: Non-Counted
#show privilege
Current privilege level is 15
05-09-2011 12:44 PM
Hi
Yes the the 3560X is a licence based model.
ie there are three licenses.
Lan-base
Ip-base
Ip-services
WS-C3560-24P-L = Lanbase (the L in the end) this is a L2 device.
This means amongst other things that it can not do ip routing due to the licensing.
If you want to do routing with the Lanbase then you need to upgrade it with a new license to minimum IP-base.
Please grab a new licence and after relaod u shld be fine
05-09-2011 12:50 PM
Hi Chandu.84,
Good job!! 5-Point for you.
Toshi
05-09-2011 12:45 PM
Hi,
Guy, you're using LAN BASE license. You need to upgrade it.
####
License Level: lanbase
License Type: Permanent
####
HTH,
Toshi
05-09-2011 12:46 PM
grrr. .... ggrrr...
much thanks for your help
Zak
05-09-2011 12:55 PM
Thnx Toshi
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide