12-20-2017 03:01 AM - edited 03-08-2019 01:10 PM
Hi all,
I have two c3850 24XS with stack, after the switch boot says the switch two don't have a stack software updated and i did auto upgrade and they pick the software from the switch one. Now the stack working perfect, after some time I unplugged the power from switch 2(member) to boot standalone without stack.
Switch one (previous master) boot normally but switch two(previous member) doesn't boot no light blink on front of the switch. When I reconnect the stack cables the switch two boot and the light start blink.
How can I boot both switch standalone without stack, there is any configuration I have to do?
Please help!!!
12-20-2017 03:06 AM
12-20-2017 03:09 AM
Hi Leo,
Thanks for your reply, The power supply it is OK and all fun on the switch appear green on the back.
12-20-2017 03:11 AM
@denilson.mota wrote:
Switch one (previous master) boot normally but switch two(previous member) doesn't boot no light blink on front of the switch. When I reconnect the stack cables the switch two boot and the light start blink.
Ehhhh, what????
Can you explain what you mean by "reconnect the stack cables"?
12-20-2017 03:17 AM
Mean that when I remove both stack data and power the previous standby switch not boot it self, no power, no light in front only the fan light on the back are blink green.
But when I plug back the stack data and power cables, and plug the power back on both switch the switch boot normally. seems like the standby switch need the active switch to start.
12-20-2017 03:26 AM
When both switches are stacked and powered up, what is the output of:
sh env power all
sh power-stack detail
12-20-2017 11:15 AM
12-20-2017 03:25 AM
I'm stack here now, any idea?
switch: dir flash:
Directory of flash:/
151089 drwx 4096 .
2 drwx 4096 ..
151090 -rw- 2097152 nvram_config
151091 -rw- 15954560 cat3k_caa-guestshell.16.03.03.SPA.pkg
151092 -rw- 22173639 cat3k_caa-rpbase.16.03.03.SPA.pkg
151093 -rw- 264899192 cat3k_caa-rpcore.16.03.03.SPA.pkg
151094 -rw- 9091712 cat3k_caa-srdriver.16.03.03.SPA.pkg
151095 -rw- 191324788 cat3k_caa-wcm.16.03.03.SPA.pkg
151096 -rw- 13404796 cat3k_caa-webui.16.03.03.SPA.pkg
151097 -rw- 1236 packages.conf
151098 -rw- 296 bootloader_evt_handle.log
151099 drwx 4096 core
190849 drwx 4096 .prst_sync
11 drwx 4096 .rollback_timer
7953 drwx 4096 dc_profile_dir
7955 drwx 4096 gs_script
151100 -rw- 65301 memleak.tcl
151101 drwx 4096 .installer
151103 -rw- 34 pnp-tech-time
151104 -rw- 21664 pnp-tech-discovery-summary
151105 -rw- 81992100 cat3k_caa-base.SPA.03.07.04E.pkg
151106 -rw- 36656136 cat3k_caa-infra.SPA.03.07.04E.pkg
151107 -rw- 28904332 cat3k_caa-platform.SPA.03.07.04E.pkg
151108 -rw- 46349632 cat3k_caa-iosd-universalk9.SPA.152-3.E4.pkg
151109 -rw- 128582464 cat3k_caa-wcm.SPA.10.3.141.0.pkg
151110 -rw- 5667516 cat3k_caa-drivers.SPA.03.07.04E.pkg
198802 drwx 4096 virtual-instance
12 drwx 4096 vman_fdb
15905 drwx 4096 onep
151112 -rw- 1036 vlan.dat
31809 drwx 4096 wnweb_store
2603741184 bytes available (909840384 bytes used)
switch:
12-20-2017 03:07 AM - edited 12-20-2017 03:09 AM
-edit- should have read the post! :)
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide