11-20-2018 02:33 AM - edited 03-08-2019 04:39 PM
Hi there,
today I found theese log messages but I have no idea what they are about. No changes has been recently made.
1355235: Nov 20 11:23:57.793: %C4K_HWFLOWMAN-3-NFEINTERRUPTSTATUS: (Suppressed 6765 times)module: fl InterruptStatus: 0x8
1355236: Nov 20 11:24:26.085: %C4K_HWFLOWMAN-4-NFEFLINTERRUPT: (Suppressed 107103 times)NFE FL ipv6AddrCompTblMemCorrectedEccErr interrupt. rep[0]: 0x78860A346, rep[1]: 0x2886153D51237C27, rep[2]: 0x266BB77B1C73FAB9, valid: false, multipleErrorsDetected: true, addr: 0x388, ecc: 0xB9
1355237: Nov 20 11:24:27.797: %C4K_HWFLOWMAN-3-NFEINTERRUPTSTATUS: (Suppressed 6685 times)module: fl InterruptStatus: 0x8
1355238: Nov 20 11:24:56.088: %C4K_HWFLOWMAN-4-NFEFLINTERRUPT: (Suppressed 107311 times)NFE FL ipv6AddrCompTblMemCorrectedEccErr interrupt. rep[0]: 0x78860A346, rep[1]: 0x2886153D51237C27, rep[2]: 0x266BB77B1C73FAB9, valid: false, multipleErrorsDetected: true, addr: 0x388, ecc: 0xB9
1355239: Nov 20 11:24:57.801: %C4K_HWFLOWMAN-3-NFEINTERRUPTSTATUS: (Suppressed 6708 times)module: fl InterruptStatus: 0x8
1355240: Nov 20 11:25:24.713: %SFF8472-5-THRESHOLD_VIOLATION: Gi1/6: Rx power low warning; Operating value: -20.8 dBm, Threshold value: -19.5 dBm.
1355241: Nov 20 11:25:26.093: %C4K_HWFLOWMAN-4-NFEFLINTERRUPT: (Suppressed 106991 times)NFE FL ipv6AddrCompTblMemCorrectedEccErr interrupt. rep[0]: 0x78860A346, rep[1]: 0x2886153D51237C27, rep[2]: 0x266BB77B1C73FAB9, valid: false, multipleErrorsDetected: true, addr: 0x388, ecc: 0xB9
1355242: Nov 20 11:25:27.805: %C4K_HWFLOWMAN-3-NFEINTERRUPTSTATUS: (Suppressed 6697 times)module: fl InterruptStatus: 0x8
IOS version: cat4500e-universalk9.SPA.03.04.03.SG.151-2.SG3.bin
cisco WS-C4510R+E
Can anyone explain what is going on?
Solved! Go to Solution.
11-20-2018 04:46 AM
- The particular problem won't cause any outage , because it is a cosmetic bug. As far as 'stop logging' this message, it won't prevent for this cosmetic bug to remain in place. You can however filter particular messages using the logging discriminator IOS commands. A particular example can be found in this thread :
https://community.cisco.com/t5/network-management/disable-specific-syslog-message/td-p/1785449
M.
11-20-2018 02:36 AM
- Probably harmless (software bug) ; you may try recent software releases for your platform , to avoid these messages.
M.
11-20-2018 02:39 AM
11-20-2018 03:09 AM
11-20-2018 03:58 AM
- That is very difficult to assert and can have various causes, such as some new type of traffic occurring on the network, but more likely due to internal operating parameters and triggers of the particular supervisor.
M.
11-20-2018 04:08 AM
11-20-2018 04:46 AM
- The particular problem won't cause any outage , because it is a cosmetic bug. As far as 'stop logging' this message, it won't prevent for this cosmetic bug to remain in place. You can however filter particular messages using the logging discriminator IOS commands. A particular example can be found in this thread :
https://community.cisco.com/t5/network-management/disable-specific-syslog-message/td-p/1785449
M.
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide