Greetings All,
Need a little advice from someone with a little knowledge on upgrading this 6504-E to a stable firmware version. The one its on now seems a little unstable and causes some havoc from time to time. Below are my specs and hardware currently installed. I see there is a sup-bootdisk and bootflash, so I can only assume I'll have to load that new firmware in both places. Any advice or even a "this is what I would do with this older switch" would be helpful :)
Thanks in advance,
Andrew
#Cisco IOS Software, s72033_rp Software (s72033_rp-ADVENTERPRISE_WAN-M), Version 12.2(33)SXI4a, RELEASE SOFTWARE (fc2)
#Technical Support: http://www.cisco.com/techsupport
#Copyright (c) 1986-2010 by Cisco Systems, Inc.
#Compiled Fri 16-Jul-10 19:51 by prod_rel_team
System image file is "sup-bootdisk:s72033-adventerprise_wan-mz.122-33.SXI4a.bin"
ROM: System Bootstrap, Version 12.2(17r)SX5, RELEASE SOFTWARE (fc1)
NAME: "WS-C6504-E", DESCR: "Cisco Systems Cisco 6500 4-slot Chassis System"
PID: WS-C6504-E , VID: V01, SN: ***********
NAME: "CLK-7600 1", DESCR: "OSR-7600 Clock FRU 1"
PID: CLK-7600 , VID: , SN: ***********
NAME: "CLK-7600 2", DESCR: "OSR-7600 Clock FRU 2"
PID: CLK-7600 , VID: , SN: NWG130601QF
NAME: "1", DESCR: "VS-S720-10G 5 ports Supervisor Engine 720 10GE Rev. 3.1"
PID: VS-S720-10G , VID: V04, SN: ***********
NAME: "msfc sub-module of 1", DESCR: "VS-F6K-MSFC3 MSFC3 Daughterboard Rev. 1.1"
PID: VS-F6K-MSFC3 , VID: V02, SN: ***********
NAME: "VS-F6K-PFC3C Policy Feature Card 3 sub-module of 1", DESCR: "VS-F6K-PFC3C Policy Feature Card 3 Rev. 1.0"
PID: VS-F6K-PFC3C , VID: V01, SN: ***********
NAME: "3", DESCR: "WS-X6724-SFP CEF720 24 port 1000mb SFP Rev. 4.1"
PID: WS-X6724-SFP , VID: V06, SN: ***********
NAME: "WS-F6700-CFC Centralized Forwarding Card sub-module of 3", DESCR: "WS-F6700-CFC Centralized Forwarding Card Rev. 4.1"
PID: WS-F6700-CFC , VID: V06, SN: ***********
NAME: "4", DESCR: "WS-X6148-GE-TX 48 port 10/100/1000mb EtherModule Rev. 7.2"
PID: WS-X6148-GE-TX , VID: V01, SN: ***********
NAME: "FAN-MOD-4HS 1", DESCR: "High Speed Fan Module for CISCO7604 1"
PID: FAN-MOD-4HS , VID: V01, SN: ***********
NAME: "PS 1 PWR-2700-AC/4", DESCR: "2700W AC power supply for CISCO7604 1"
PID: PWR-2700-AC/4 , VID: V02, SN: ***********
