c6880X , version 15.5 SY6 unable to edit the netflow recorder

[gentjan]

Hello,

I was not able to add some configuration to an existing Flow record, and got this message.

% Flow Record: Flow Record is in use. Remove from all clients before editing.

Please, support me in this case as I need to work on some changes in Flow recorder.

[Mark Elsen]

 - Check if this thread can provide hints : https://community.cisco.com/t5/routing/flexible-netflow-v-9/td-p/2834823

 M.

[balaji.bandi]

if the flow already used in the interface config, you can not make any changes.

if the interace has below config - remove and make changes.

ip flow monitor bbbbbbbbbbbb input or output

[gentjan]

I removed the "ip flow monitor <named> output" from interface VLAN 7 and still not able to make any change in the existing Flow record.

[balaji.bandi]

check any other place where it was used.

[gentjan · Accepted solution]

I removed the "ip flow monitor <named> output" from interface VLAN 7, then I removed the flow monitor settings.

After that , I was able to remove the flow recorder, create the new one with same name with all features .

Thanks for all supports!

[balaji.bandi]

glad our suggestion worked,. and appricated your input.