05-06-2021 06:52 AM - edited 05-06-2021 06:57 AM
Hi all
We have 3 C9200-48P stacked switches, with SFP+ network modules C9200-NM-4X on each.
We have observed the Te1/1/x ports have disappeared from the interfaces list.
Is the network module C9200-NM-4X hot swappable ? Can we try to remove it then re-insert it while the switch is running, in order to see the Te ports re-appearing ?
05-06-2021 07:00 AM
Hi there,
Is there anything in the logs to suggest the network module has been removed?
Yes, the Network Module is hot-swappable and can be removed/ inserted whilst the switch is powered on.
cheers,
Seb.
05-06-2021 07:03 AM
05-06-2021 07:04 AM
yes they are hotswappble, but suggest to do this in maintenance window always.
05-06-2021 07:08 AM
05-06-2021 07:11 AM
Also try to capute logs see if you can see any obnormal ?
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide