cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
296
Views
10
Helpful
2
Replies

C9200CX Questions

qzhou
Beginner
Beginner

Hello,

I'm planning on buying a C9200CX-12P-2X2G-(A|E) for my home network. I'm connected to my ISP through an XGS-PON stick (10Gb u/l link). Down the stream, I got some PoE+ APs and two 10G ethernet devices. Here's my question:

1. I see lots of models in Catalyst 9000 series have NAT, and above, but given the short history of 9200CX, and lack of documentation, I don't if C9200CX is NAT capable

2. The XPS-PON transceiver is also a very new thing, how am I supposed to know if it would work with C9200CX? Assuming the device is compliant with standards.

Thanks in advance,

Quan

1 Accepted Solution

Accepted Solutions

marce1000
VIP Mentor VIP Mentor
VIP Mentor

 

 - Ref : https://www.ciscolive.com/c/dam/r/ciscolive/global-event/docs/2022/pdf/BRKARC-2098.pdf  , looks like 9200 series can not do NAT , look for Fixed Access Positioning in the document , 

 M.

View solution in original post

2 Replies 2

marce1000
VIP Mentor VIP Mentor
VIP Mentor

 

 - Ref : https://www.ciscolive.com/c/dam/r/ciscolive/global-event/docs/2022/pdf/BRKARC-2098.pdf  , looks like 9200 series can not do NAT , look for Fixed Access Positioning in the document , 

 M.

balaji.bandi
VIP Community Legend VIP Community Legend
VIP Community Legend

CX model lower version of Enterprise models like Cat 9300 with Advantage license features. so at this stage, there is no option you can do.

BB

***** Rate All Helpful Responses *****

How to Ask The Cisco Community for Help

Getting Started

Find answers to your questions by entering keywords or phrases in the Search bar above. New here? Use these resources to familiarize yourself with the community:

Recognize Your Peers