C9300-NM-8X compatibility with SFP-10/25G-CSR-S

[uppermost]

Will below SFP

SFP-10/25G-CSR-S - 10/25GBASE-CSR SFP28

work with this module

C9300-NM-8X

This module has eight 10 GE slots with an SFP+ port in each slot. Each port supports a 1 GE or 10 GE connection. Any combination of SFP and SFP+ modules are supported.

on 9300-24P switch when hardcoded to 10GB ?

[M02@rt37]

Hello @uppermost,

Here the SFP compatibles with C9300-NM-8X:

https://tmgmatrix.cisco.com/?npid=670

--SFP-10/25G-CSR-S not compatible

[Flavio Miranda]

Hi @uppermost 

It is listed on the compatibility matrix. Which means it must be supported

https://tmgmatrix.cisco.com/?npf=76

[M02@rt37]

Hello @Flavio Miranda

With C9300-NM-2Y yes it's ok! but with C9300-NM-8X it is not compatible.

[Glenn Costantino]

If these are not compatible today at the 10GB rate, will it be in the future with an IOS update or is it just electrically not possible with this module? 

C9300-NM-8X and the SFP-10/25G-CSR-S

[M02@rt37]

Hello @uppermost 

not possible with this module! Even after upgrade!

You need  C9300-NM-2Y -- https://tmgmatrix.cisco.com/?npid=48

[balaji.bandi]

No it work work with NM-8X module.

10G/25G SFP work with C9300-NM-2Y Module